高折射率聚酯树脂粘合剂的合成及乳化
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省自然科学基金资助项目(B2012201112)


Preparation and Emulsion of the Polyester Resin Adhesive with High Refractive Index
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以2,6-萘二甲酸二甲酯(NDC)、间苯二甲酸二甲酯-5-磺酸钠(SIPM)、自制聚醚多元醇和乙二醇为原料,通过熔融缩聚的方法制得了系列聚酯树脂粘合剂。通过改变NDC的用量,研究了萘环含量变化对树脂折射率的影响。用凝胶渗透色谱、红外光谱、核磁共振谱、折光率和粒度分析对产物结构及乳化性能进行了表征。结果显示,随着聚酯树脂中萘环含量的增加,折射率从1.6051提高到1.6271,并且聚酯树脂具有易乳化特性,水乳液放置90d后仍具有优异的分散性和稳定性。

    Abstract:

    A series of polyester resins were synthesized with dimethyl naphalene-2,6-dicarboxylate(NDC), sodium dimethyl isophthalate-5-sulfonate, ethylene glycol and self-made polyether polyol through melt condensation polymerization. The content influence of naphthalene on the refractive index of polyester resin was studied by changing the dosage ratio of NDC. The structure and performance of the products were characterized by gel permeation chromatography, infrared spectrometer, nuclear magnetic resonance spectrometer, abbe refractometer and granulometer. The results show that the refractive index of polyester resin increases with increasing the content of naphthalene in the resin, and the refractive index of polyester resin is enhanced from 1.6051 to 1.6271. The polyester resin can be well emulsified in water by an emulsifier, and the emulsion has good stability after standing for 90 d.

    参考文献
    相似文献
    引证文献
引用本文

靳书丛,杨 杨,张 燕,闰明涛.高折射率聚酯树脂粘合剂的合成及乳化[J].高分子材料科学与工程,2017,33(10):18-22. Shucong Jin, Yang Yang, Yan Zhang, Mingtao Run. Preparation and Emulsion of the Polyester Resin Adhesive with High Refractive Index[J]. Polymer Materials Science & Engineering,2017,33(10):18-22.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司