杜仲胶对聚乳酸的增韧改性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

辽宁省教育厅科学研究一般项目(L2015422);辽宁省博士启动基金(201501074);北京市科学技术研究院青年骨干计划(201617)


Highly Toughened Polylactide by Eucommia Ulmoides Gum
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融共混的方法,采用生物基高分子材料杜仲胶(EUG)对聚乳酸(PLA)进行增韧改性,并制备了PLA/EUG共混物。采用扫描电子显微镜、广角X 射线衍射、差示扫描量热分析、动态力学性能测试和旋转流变仪表征了PLA/EUG共混物的相结构、结晶性能、热性能、动态力学性能和流变性能。实验结果表明,聚乳酸与杜仲胶为典型的热力学不相容体系;EUG以微米及亚微米的尺寸分散在聚乳酸中。通过对PLA/EUG共混物的拉伸性能和力学性能研究,发现EUG的加入明显地改变了共混物的拉伸行为,由纯PLA 的脆性断裂向韧性断裂转变。当PLA/EUG 共混物中PLA/EUG的质量比为90/10时,共混物的断裂伸长率较纯PLA提高了14倍,缺口冲击强度提高了5.8倍。共混物拉伸断面照片表明基体在断裂前发生了明显的塑性变形,在断裂过程中吸收了相当大的能量,从而使得共混物的韧性得以提高。EUG能有效地改善PLA的韧性,可以作为新型的聚乳酸增韧改性剂。

    Abstract:

    Eucommia ulmoides gum (EUG) was employed to toughen brittle polylactide(PLA) by melt blending. The phase structures, thermal properties, crystallization behavior, dynamic properties and rheological properties of PLA/EUG blends were characterized by SEM, DSC, WAXD, DMTA and rheological experiments. The results indicate that PLA/EUG blend is typically thermodynamic incompatible systems, and EUG is dispersed in PLA with the size of micrometer and submicron. The tensile and impact properties indicate that EUG changes the failure behavior of PLA from brittle to ductile. When the mass ratio of PLA to EUG of PLA/EUG blend is 90 to 10, the elongation at break and notch impact strength increase 14 times and 5.8 times, respectively. SEM micrographs of tensile-fractured surface reveal that the toughness improvement is caused by a largescale matrix deformation which would absorb much energy. All the results demonstrate that EUG can effectively toughen PLA and can be adopted as a new type of PLA toughener.

    参考文献
    相似文献
    引证文献
引用本文

姚 蕾,郭 姝,康海澜,杨 凤,方庆红.杜仲胶对聚乳酸的增韧改性[J].高分子材料科学与工程,2017,33(10):39-44. Lei Yao, Shu Guo, Hailan Kang, Feng Yang, Qinghong Fang. Highly Toughened Polylactide by Eucommia Ulmoides Gum[J]. Polymer Materials Science & Engineering,2017,33(10):39-44.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司