颗粒Al2O3 增强环氧树脂复合材料的微波固化动力学及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51575266);江苏省科技计划(BY2015057-22);国家商用飞机制造工程技术研究中心创新基金(SAMC13-JS-15-021);上海飞机制造有限公司委托关键技术攻关项目(JS-20130913/005)


Kinetic Analysis and Characterization of Microwave Curing Process of Epoxy Resins Reinforced with Al2O3Particles
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用Avrami法研究了Al2O3 颗粒及其添加量对E51/DDS体系的微波固化表观活化能的影响,采用差示扫描量热、动态力学分析、力学性能测试和扫描电子显微镜等试验手段对产物的热性能、力学性能及微观形态进行研究。结果表明,Al2O3 颗粒增强E51/二氨基二苯砜(DDS)体系可以显著降低其微波固化的反应活化能,其中相比于未添加的体系,添加量达到40%时,其微波固化活化能降低了19.3%;加入Al2O3 颗粒可以提高体系的玻璃化转变温度,增加幅度与添加量正相关;且体系的损耗模量随着添加量的增加而降低。拉伸和弯曲模量随着Al2O3 添加量的增加而增加,而拉伸和弯曲强度则呈现先增加后减小的趋势。断面分析表明Al2O3 颗粒的存在阻止了微裂纹的扩展,消耗更多的能量,提高了浇注体的力学性能。

    Abstract:

    The Avrami method was utilized to study the effect of Al2O3content on the apparent activation energy of microwave curing for E51/diaminodiphenyl sulfone (DDS) system. Differential scanning calorimeter method, dynamic mechanical analysis, mechanical performance test and scanning electron microscopic images were used to study the thermal properties, mechanical properties and micromorphology E51/DDS system. The results show that the addition of Al2O3could significantly reduce the activation energy of microwave curing. Compared with the non-additive system, when the mass fraction of Al2O3reaches 40%, the activation energy is decreased by 19.3%. The glass transition temperature of E51/DDS system is improved by adding Al2O3and the increase amplitude is positively correlated with the content. The loss module decreases with the content of Al2O3caused by the particle reinforcement. The tensile and flexural module of E51/DDS system increase with increase of the Al2O3content while the tensile and flexural strength increase firstly and then decrease with the optimum additive amount of 30%. The fracture morphology analysis indicates that the existence of Al2O3hinder the propagation of micro-crack and more energy is consumed, thus improving the mechanical performance of E51/DDS epoxy cast.

    参考文献
    相似文献
    引证文献
引用本文

郑伟峰,周来水,袁铁军,安鲁陵,蒋麒麟.颗粒Al2O3 增强环氧树脂复合材料的微波固化动力学及性能[J].高分子材料科学与工程,2017,33(10):65-71. Weifeng Zheng, Laishui Zhou, Tiejun Yuan, Luling An, Qilin Jiang. Kinetic Analysis and Characterization of Microwave Curing Process of Epoxy Resins Reinforced with Al2O3Particles[J]. Polymer Materials Science & Engineering,2017,33(10):65-71.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司