SiO2 离子纳米粒子/聚苯硫醚复合材料的性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省教育厅科学技术研究计划青年人才基金资助(Q20141606);国家自然科学基金资助项目(51403165)


Preparation and Property of SiO2 Ion Nanoparticles Filled Polyphenylene Sulfide Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以纳米SiO2 为核,通过表面接枝3-(三甲氧基硅丙基)二甲基十八烷基氯化铵,然后与壬基酚聚氧乙烯醚磺酸钠进行离子交换反应,得到室温可流动SiO2 离子纳米粒子。将粒子作为填料与聚苯硫醚(PPS)共混制备复合材料。透射电镜结果表明7%(质量分数)填充量时粒子均匀分散在PPS基体中;力学测试表明粒子能够提高PPS的断裂伸长率,7%填充量时弹性模量最大;断面扫描电镜结果表明SiO2 离子纳米粒子通过其表面有机长链离子聚合物与PPS基体相互作用能够提高材料的韧性。热重分析结果表明10%填充量能够降低复合材料的初始热分解温度,这可能与填充量高时,表面柔性分子链降低聚合物分子链刚性所致。

    Abstract:

    In this paper, SiO2 ion nanoparticles were fabricated via N, N-didecyl-N-methyl-N-(3-trimethoxysilylpropyl) ammonium chloride covalently grafted on the surface of SiO2 nanoparticles as core, and then poly(ethylene glycol) 4-nonylpheny 13-sulfopropyl ether sodium salt was grafted on the surface of SiO2 nanoparticles through ion exchange reaction. The well-dispersed hybrid ion nanoparticles exhibit liquid-like behavior at room temperature. TEM result indicates that 7% loading nanoparticles disperse uniformly in polyphenylene sulfide (PPS) matrix. Mechanical tests show that SiO2 ion nanoparticles can elevate the elongation rate of PPS, and elastics modulus reaches the maximum value when the content is 7%. SEM of fraction of PPS nanocomposites further confirms that surface organic long chain ion polymer can interact with PPS matrix to improve the toughness. TGA results manifest that 10% loading decreases the initial decomposition temperature of nanocomposites, which is ascribed to the surface soft polymer chain of SiO2 which can reduce the rigidity of PPS molecule chains.

    参考文献
    相似文献
    引证文献
引用本文

殷先泽,翁普新,杨诗文,王罗新,熊传溪. SiO2 离子纳米粒子/聚苯硫醚复合材料的性能[J].高分子材料科学与工程,2017,33(10):76-81. Xianze Yin, Puxin Weng, Shiwen Yang, Luoxin Wang, Chuanxi Xiong. Preparation and Property of SiO2 Ion Nanoparticles Filled Polyphenylene Sulfide Nanocomposites[J]. Polymer Materials Science & Engineering,2017,33(10):76-81.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司