过氧化物硫化三元乙丙橡胶的高温硫化过程模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

青岛科技大学博士科研启动基金(010022753)


High Temperature Curing Process Simulation of the Peroxide-Cured Ethylene-Propylene-Diene Rubber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过橡胶加工分析仪探讨了采用2种一级唯象动力学方程模拟过氧化物高温硫化三元乙丙橡胶(EPDM)的可行性。结果表明,该模型与实测曲线之间具有良好的相关性,随着硫化温度的升高,过氧化物硫化EPDM 橡胶的交联反应程度和断链反应程度均增大,反应速率加快。当温度低于195 ℃时,交联反应的活化能与断链反应的活化能基本相等;当高于195℃时,交联反应的活化能降低,而断链反应活化能的大小依赖于温度变化。并且发现高温硫化EPDM 硫化胶拉伸储能模量(E’)的频率依赖性明显增强,硫化时间长短也会影响分子链的松弛行为。

    Abstract:

    The feasibility of curing process simulation was discussed by two first-order kinetic equations to describe the curing behavior of peroxide-cured ethylene propylene diene rubber (EPDM) by use of rubber process analyzer. The results show that the proposed model has a good correlation with the experimental data. When the curing temperature increases, the cure extent and chain scission increase, both reaction rates increase. When the curing temperature is lower than 195 ℃, the activation energy of cross-linking reaction is mostly equal to one of chain scission reaction. When the curing temperature is higher than 195 ℃, the activation energy of cross-linking reaction decreases, the activation energy of chain scission reaction changes with curing temperature. Furthermore, the dependence of tensile storage modulus (E′) on frequency increases for the EPDM vulcanizates at a higher curing temperature. The curing time also affects the relaxation behavior of chains.

    参考文献
    相似文献
    引证文献
引用本文

王 鹤,张清红,杨 鎏,赵树高.过氧化物硫化三元乙丙橡胶的高温硫化过程模拟[J].高分子材料科学与工程,2017,33(10):89-93. He Wang, Qinghong Zhang, Liu Yang, Shugao Zhao. High Temperature Curing Process Simulation of the Peroxide-Cured Ethylene-Propylene-Diene Rubber[J]. Polymer Materials Science & Engineering,2017,33(10):89-93.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司