碳纤维/环氧超厚度复合材料壁板的固化工艺优化及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Curing Process Optimization with Extra-Thickness Carbon Fiber Reinforced Epoxy Resin Matrix Composites and Their Properties
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为制定适用于大厚度环氧基碳纤维增强复合材料的固化制度,首先采用热分析方法对预浸料的固化行为进行了详细的研究,结合预埋热电偶的方法在线监测了不同厚度的壁板在等速率升温条件下的固化过程,通过系统的研究,并提出了增加缓慢升温阶段的固化制度。文中对固化制度优化后的大厚度复合材料制件的进行了超声C扫描检测和内部微观结构等分析,结果证明,采用在120℃和150℃缓慢升温的方式可以有效地控制大厚度复合材料制件内部的固化集中放热现象,并可大幅度提高制造过程中的温度均匀性。采用上述工艺,有望得到质量优异的大厚度复合材料制件。

    Abstract:

    With the purpose of determining suitable curing cycle of carbon fiber reinforced epoxy resin composites with extra thickness, the standard curing process was first inspected with embedding thermal couples in the composite lamination. Based on the systematically study on curing properties of prepregs, curing process optimizations with low heating rate during the standard curing were conducted, and the corresponding cured composite laminations were evaluated with ultrasonic C scan and internal quality analysis, and the results exhibit that intensive heat release in curing of a super-thick composite laminate could be effective alleviated via introducing a lower heating rate beginning at 120 ℃ or 150 ℃,thus, a better inner temperature uniformity is obtained. It should be concluded that high quality composite laminates with extra thickness could be manufactured when suitable optimized curing cycles are applied.

    参考文献
    相似文献
    引证文献
引用本文

杨 洋,王洪恩,袁协尧,见雪珍.碳纤维/环氧超厚度复合材料壁板的固化工艺优化及性能[J].高分子材料科学与工程,2017,33(10):101-107. Yang Yang, Hong’en Wang, Xieyao Yuan, Xuezhen Jian. Curing Process Optimization with Extra-Thickness Carbon Fiber Reinforced Epoxy Resin Matrix Composites and Their Properties[J]. Polymer Materials Science & Engineering,2017,33(10):101-107.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司