超临界CO2下聚丙烯/乙烯-辛烯共聚物共混物微孔发泡材料的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51227802,51473103);四川省杰出青年基金(2014JQ0001)


Preparation of Microcellular Polypropylene/Poly(octene-ethylene) Foams by Using Supercritical Carbon Dioxide
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用熔融共混的方法制备了不同含量乙烯-辛烯共聚物(POE)的聚丙烯(PP)/乙烯-辛烯共聚物(POE)的共混物,研究了共混物的相形态和流变性能。用超临界二氧化碳(sc-CO2)作为物理发泡剂,制备了PP/POE的共混物微孔发泡材料。研究了POE含量、温度和压力对微孔发泡材料泡孔的影响。结果表明,发泡材料平均泡孔尺寸在2~7μm 之间,泡孔密度大于109 cm-3。随着POE含量的增加、温度的升高,泡孔直径增大,泡孔密度降低;随着压力的增大,泡孔尺寸先增大后减小,泡孔密度逐渐增大。

    Abstract:

    Polypropylene(PP) and poly(octene-ethylene)(POE) blends with different contents of POE mixing in it were prepared, the morphology of the blends and the rheology properties were studied. By using supercritical carbon dioxide(sc-CO2) as foaming agents, the microcellular foams of PP/POE blends were successfully prepared. The influence of the content of POE, the temperature and the pressure on the cell size, cell density, cell structure and the density of the foams was examined. The results indicate that the cell size is between 2 μm and 7 μm and the cell density is more than 109 cm-3. The cell size increases and the cell density reduces with increasing the content of POE or the temperature. The cell size decreases firstly then increases and the cell density gradually increases with increasing of the pressure.

    参考文献
    相似文献
    引证文献
引用本文

王 朝,李 姜,郭少云.超临界CO2下聚丙烯/乙烯-辛烯共聚物共混物微孔发泡材料的制备[J].高分子材料科学与工程,2017,33(10):108-113. Chao Wang, Jiang Li, Shaoyun Guo. Preparation of Microcellular Polypropylene/Poly(octene-ethylene) Foams by Using Supercritical Carbon Dioxide[J]. Polymer Materials Science & Engineering,2017,33(10):108-113.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司