耐热型聚苯乙烯微球的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项资金(buctrc201531)


Preparation of Heat-Resisting Polystyrene Microspheres
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过苯乙烯和二乙烯基苯(DVB)自由基共聚方法合成了聚苯乙烯(PS)微球,并采用热交联方法对产物进行高温热处理,制备了耐热型聚苯乙烯微球。差示热分析和傅里叶红外光谱分析表明,热处理前DVB的添加量从5.5%增加到15%,其产物的玻璃化转变温度(Tg)基本保持在117℃左右不变;高温热处理使悬挂在聚合物分子链上的乙烯基双键发生自由基聚合交联反应,产物的交联密度提高,Tg 明显提高,并且随着DVB添加量的增加Tg 不断上升。产物热处理温度越高所需热处理时间越短,但是温度过高或时间过长,分子链会发生热降解副反应,导致Tg 下降,较优的热处理条件为195℃时热处理1h。

    Abstract:

    The random copolymer polystyrene(PS) microspheres were prepared with styrene and divinyl benzene (DVB)by suspension polymerization,which was followed by thermal-curing to improve the heat-resisting performance. The samples were characterized by FT-IR spectrometer and differential scanning calorimetry(DSC). The results show that the glass transition temperature(Tg) remains a constant at about 117 ℃ with the increased mass fraction of DVB from 5.5% to 15.0% before heat treatment. Heat method can significantly improve its Tg, and the Tg increases with the increased content of DVB. High temperature reacted on vinyl bonds which were hanging on PS molecular chains to cause crosslinking density improved by radical crosslinking polymerization. The required heat time is decreased with increasing heat temperature, and thermal degradation may occur on the molecular chains when time and temperature exceed certain point. In this study, it is found the optimal heat condition is 195 ℃ and 1 h.

    参考文献
    相似文献
    引证文献
引用本文

姚 明,宁天明,姜志国.耐热型聚苯乙烯微球的制备[J].高分子材料科学与工程,2017,33(10):121-124. Ming Yao, Tianming Ning, Zhiguo Jiang. Preparation of Heat-Resisting Polystyrene Microspheres[J]. Polymer Materials Science & Engineering,2017,33(10):121-124.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司