纺织结构碳纤维增强聚醚醚酮基复合材料的制备及界面改性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(21404023);国家商用飞机制造工程技术研究中心创新基金(COMAC-SFGS-2016-33310);中央高校基本科研业务费专项资金(14D228102)


Preparations and Interface Modifications for Carbon Fiber Fabrics Reinforced Polyetheretherketone Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用热压成型法制备纺织结构碳纤维增强聚醚醚酮(CFF/PEEK)航空热塑性复合材料。通过对碳纤维(CF)进行去浆、活化,及采用磺化聚醚醚酮(SPEEK)进行表面涂层,显著提高了CFF/PEEK复合材料的层间剪切强度。讨论了热压温度、压力等工艺参数对材料综合力学性能的影响规律,确定优化工艺条件,制备的复合材料拉伸强度和弯曲强度分别达到714.29MPa和955.84MPa。借助扫描、金相显微镜等观察手段,发现经过界面改性处理后,复合材料断裂发生在基体内部而非界面处,基体与增强体浸润性和结合性良好。

    Abstract:

    In this paper, carbon fiber fabrics reinforced polyetheretherketone (CFF/PEEK) composites for aircrafts were prepared by hot-press processing. A series of interface modifications including agent removing, activating and coating of carbon fiber (CF) with sulfonated polyetheretherketone (SPEEK) were conducted to improve the interlaminar shear strength of composites. The processing parameters such as temperatures and pressure for hot press processing were optimized based on discussions of their effects on mechanical performances of composites. Thus CFF/PEEK composites with high mechanical performances were produced. The tensile strength and flexural strength are 714.29 MPa, 955.84 MPa, respectively. SEM and metallographic microscope observations show that after interface modifications, fractures appear within the PEEK matrix rather than the interface of CF-PEEK in composites, which indicates well strength adhesions between PEEK and CF.

    参考文献
    相似文献
    引证文献
引用本文

张 照,曹 硕,朱 姝,杨 洋,滕翠青,余木火.纺织结构碳纤维增强聚醚醚酮基复合材料的制备及界面改性[J].高分子材料科学与工程,2017,33(10):141-148. Zhao Zhang, Shuo Cao, Shu Zhu, Yang Yang, Cuiqing Teng, Muhuo Yu. Preparations and Interface Modifications for Carbon Fiber Fabrics Reinforced Polyetheretherketone Composites[J]. Polymer Materials Science & Engineering,2017,33(10):141-148.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司