三元乙丙橡胶/石蜡弹性定形相变材料的制备及性能表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金委员会-中国工程物理研究院联合基金资助项目(U1530102);四川省科技厅应用基础研究重点项目(2017JY0149);四川省教育厅科研创新团队项目(17TD0043);西南科技大学研究生创新基金资助项目(17ycx016)


Preparation and Characterization of EPDM/Paraffin Elastic Shape-Stabilized Phase Change Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用三元乙丙橡胶(EPDM)作为支撑材料,石蜡为相变材料,通过溶液共混法制备了一种弹性定形相变材料(ESSPCMs)。采用扫描电子显微镜、差示扫描量热仪及电子万能试验机研究了EPDM/石蜡不同配比对弹性定形相变材料的断面微观形貌、热学性能和力学性能的影响。实验结果表明,在ESSPCMs中,EPDM 和石蜡相容性良好,随着石蜡含量的增加,其相变焓值增大,力学性能提升,渗漏率下降。当石蜡的质量分数为60%时,ESSPCMs的热学和力学性能最优,相变焓值达到148.52J/g,断裂伸长率达到2300%,且经48h冷热循环后渗漏率仅为0.35%。

    Abstract:

    An elastic shape-stabilized phase change materials (ESSPCMs) were prepared by solution blending method using EPDM as support material and paraffin wax as phase change material. The effects of different ratios of EPDM/paraffin on the microstructure, thermal properties and mechanical properties of the elastomeric shape-stabilized phase change materials were investigated by scanning electron microscope, differential scanning calorimetry and electronic universal testing machine. The material was also subjected to cyclic stability test. The experimental results show that the compatibility of EPDM and paraffin is very good. With increase of the paraffin content, the mechanical properties are improved and the leakage rate decreases. When the mass fraction of paraffin is 60%, the performance is the best and the enthalpy of transformation is 148.52J / g, the elongation at break reaches 2300%, and the leakage rate is only 0.35% after 48h hot and cold cycles.

    参考文献
    相似文献
    引证文献
引用本文

程金旭,张 凯,杨文彬,范敬辉,吴菊英,谢长琼,何方方.三元乙丙橡胶/石蜡弹性定形相变材料的制备及性能表征[J].高分子材料科学与工程,2017,33(10):160-163. Jinxu Cheng, Kai Zhang, Wenbin Yang, Jinghui Fan, Juying Wu, Changqiong Xie, Fangfang He. Preparation and Characterization of EPDM/Paraffin Elastic Shape-Stabilized Phase Change Materials[J]. Polymer Materials Science & Engineering,2017,33(10):160-163.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司