选择性激光烧结3D 打印聚合物及其复合材料的研究进展
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51433006)


Progress on Selective Laser Sintering of Polymers and Polymer Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选择性激光烧结技术(SLS)是一种以粉末为原料的3D打印技术,而高分子材料因其良好的理化性能和可加工性能,是运用最早且最为广泛的一种SLS材料,但目前SLS加工聚合物仍存在可加工材料种类少、制品性能低等缺点。通过向聚合物引入无机功能性填料制备SLS聚合物复合材料,是改善SLS聚合物制品的性能和实现制品功能化最简单可行的方法。文中介绍了适用于SLS打印的聚合物复合粉末的制备方法,综述了该领域国内外研究现状,并讨论了SLS高分子材料在未来的发展方向。

    Abstract:

    Selective laser sintering (SLS) is a powder based rapid prototyping technology. Polymers are the first and widely applied in SLS for their good physicochemical property and processing performance. However, material limitation and poor performance of materials are the main obstacles for SLS polymers. It is a simple and feasible method to improve the performance of SLS polymeric materials by reinforcing them with inorganic fillers. This paper introduced the preparation methods of polymer composite powder for SLS, and reviewed the current researches at home and abroad, and discussed the development trends in this field.

    参考文献
    相似文献
    引证文献
引用本文

李志超,甘鑫鹏,费国霞,夏和生.选择性激光烧结3D 打印聚合物及其复合材料的研究进展[J].高分子材料科学与工程,2017,33(10):170-174. Zhichao Li, Xinpeng Gan, Guoxia Fei, Hesheng Xia. Progress on Selective Laser Sintering of Polymers and Polymer Composites[J]. Polymer Materials Science & Engineering,2017,33(10):170-174.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-10-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司