聚苯乙烯包覆正十四醇微胶囊的制备及表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

联盟计划智能纤维的关键技术(LM2015108)


Preparation and Characterization of Myristyl Alcohol Microcapsules Coated with Polystyrene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用过硫酸钾(K2S2O8)为引发剂,司班80(Span 80)和吐温80(Tween80)为复配乳化剂,聚乙烯吡咯烷酮K30(PVP-K30)为分散剂,季戊四醇四丙烯酸酯(PETA)为交联剂,采用乳液聚合法制备出了以正十四醇(MA)为芯材, 聚苯乙烯(PS)为壁材的正十四醇-聚苯乙烯相变微胶囊(MA/PS微胶囊);通过差示扫描量热仪、扫描电镜、傅里叶变换红外光谱仪和热重分析仪等仪器对制备的微胶囊进行检测表征。结果表明,当聚乙烯吡咯烷酮K30和复配乳化剂(m(Span80)∶m(Tween80)=3∶13)加入量分别为正十四醇质量的5%和4%,过硫酸钾和季戊四醇四丙烯酸酯加入量分别为苯乙烯单体质量的10%和37.5%,芯壁比为2.5∶1,搅拌速度为1000 r/min 时,所制备的MA/PS微胶囊具有良好的热稳定性和致密性。

    Abstract:

    Myristyl alcohol-polystyrene phase change microcapsules (MA/PS microcapsules) were prepared by emulsion polymerization with myristyl alcohol (MA) as core material, polystyrene (PS) as outer shell, potassium peroxodisulfate (K2S2O8) as initiator, Span 80 and Tween 80 as complex emulsifiers, the polyvinyl pyrrolidone K30 (PVP-K30) as dispersant and pentaerythritol tetraacrylate (PETA) as crosslinking agent. The microcapsules were characterized by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analyzer (TGA), et al. The results show that the prepared MA/PS microcapsules have good thermal stability and compactness when the amount of polyvinylpyrrolidone K30 and compound emulsifier (m(Span80)∶m(Tween80)=3∶13) is 5% and 4% of the mass of myristyl alcohol, respectively, potassium persulfate and pentaerythritol tetraacrylate are added 10% and 37.5% of the mass of styrene monomer respectively, the ratio of core to wall is 2.5∶1 and the stirring speed is 1000 r/min.

    参考文献
    相似文献
    引证文献
引用本文

黄云峰, 闵 洁, 叶 琳, 王丽萍, 李帅涛, 宋晓秋.聚苯乙烯包覆正十四醇微胶囊的制备及表征[J].高分子材料科学与工程,2017,33(11):139-144. Yunfeng Huang, Jie Min, Lin Ye, Liping Wang, Shuaitao Li, Xiaoqiu Song. Preparation and Characterization of Myristyl Alcohol Microcapsules Coated with Polystyrene[J]. Polymer Materials Science & Engineering,2017,33(11):139-144.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-11-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司