Ti2CTx/超高分子量聚乙烯复合材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51205111, 51472075, 51275156); 河南省科技创新人才计划(134100510008)


Preparation and Properties of Ti2CTx/Ultrahigh Molecular Weight Polyethylene Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过液相刻蚀三元层状陶瓷Ti2AlC制备了二维层状结构Ti2CTx,利用X射线衍射、场发射扫描电子显微镜、透射电子显微镜等对产物进行物相分析和微观结构表征。采用液相共混和热压成型法制备了不同Ti2CTx浓度的改性超高分子量聚乙烯(UHMWPE)复合材料,并考察了Ti2CTx层状纳米材料对复合材料断面形貌、热学性能、力学性能和摩擦学性能的影响。结果表明,Ti2AlC被剥离为纳米结构片层;层状Ti2CTx在UHMWPE基体中分散均匀且形成良好的结合界面;适量Ti2CTx纳米片的添加可提高UHMWPE的结晶度并改善基体的力学性能,当Ti2CTx质量分数为1.0%时,其弹性模量提高了将近80%;且得益于层状结构与聚合物的自润滑性的协同作用,Ti2CTx纳米片在高载荷下能显著提高UHMWPE的减摩性能

    Abstract:

    Two-dimensional layered Ti2CTx nanosheets were synthetized by liquid etching ternary layered ceramic Ti2AlC, the phase and morphology were characterized by XRD, FE-SEM and TEM. Besides, the Ti2CTx/UHMWPE composites with different amount of modified Ti2CTx were prepared by intermixing and hot-press moulding, the effects of Ti2CTx content on the fractured surface morphology, thermal, mechanical and tribological properties of the composites were investigated. As a result, Ti2AlC powders are exfoliated to nano-layered structure which are dispersed uniformly into the polymer matrix and formed good bonding interface. The degree of crystallinity increases and the mechanical properties are improved, especially, the elastic modulus increases by 80% when the mass fraction of Ti2CTx is 1.0%. The synergistic effect of nano-layered structure and self-lubrication of UHMWPE lead to better anti-frictional properties of the composites with higher load.

    参考文献
    相似文献
    引证文献
引用本文

王晓龙, 王李波, 张 恒, 申长洁, 刘凡凡, 周爱国. Ti2CTx/超高分子量聚乙烯复合材料的制备及性能[J].高分子材料科学与工程,2017,33(11):158-165. Xiaolong Wang, Libo Wang, Heng Zhang, Changjie Shen, Fanfan Liu, Aiguo Zhou. Preparation and Properties of Ti2CTx/Ultrahigh Molecular Weight Polyethylene Composites[J]. Polymer Materials Science & Engineering,2017,33(11):158-165.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-11-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司