聚苯胺包覆纤维素纳米晶/石墨烯复合电极材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广西自然科学基金资助项目(2015GXNSFAA139256,2015GXNSFAA139277,2016GXNSFAA380004);国家自然科学基金资助项目(21664006)


Preparation and Properties of Polyaniline Coated Cellulose Nanocrystals/Graphene Composite Electrode Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首先通过原位聚合的方法制备聚苯胺(PANI)包覆纤维素纳米晶(CNC)(CNC@PANI)纳米复合物,进而采用共混法制备CNC@PANI与rGO的复合电极材料(CNC@PANI/rGO)。研究不同苯胺与CNC的用量比对所得复合电极材料的结构形貌和电化学性能的影响。采用扫描电镜、X射线衍射、红外光谱以及电化学工作站等测试手段对制备的复合电极材料的结构形貌、电化学性能进行分析表征。结果表明,PANI成功地包覆在CNC的表面,且PANI通过在CNC表面的包覆,可明显改善其分散性和比表面积,以及与石墨烯的复合效果。CNC@PANI-1/rGO复合电极材料在20 mV/s扫描速率下的比电容可高达309 F/g,远远高于PANI/rGO复合电极材料的155 F/g。

    Abstract:

    Here, polyaniline (PANI) coated cellulose nanocrystals (CNC) complexs (CNC@PANI) were fabricated by in-situ polymerization. Further, blending method was used to fabricated CNC@PANI/rGO composite eletrode materials. The effect of the dosages of aniline and CNC on the structure and eletrochemical properties of the composites was studied. The structure and eletrochemical properties of the composites were charaterized by transmission electron microscopy (TEM), X-ray diffrcation spectroscopy (XRD), infrared spectroscopy (IR) and electrochemical wordstation. The results present that PANI is successfully coated on the surface of CNCs. With the covrage of PANI on the surface of CNCs, the dispersity and specific surface area of the PANI and its composite effect with rGO are improved. The specific capacitance of the CNC@PANI-1/rGO composite electrode materials is up to 309 F/g, much higher than 155 F/g of the PANI/rGO composites electrode materials.

    参考文献
    相似文献
    引证文献
引用本文

刘红霞, 徐 阳, 周昌兵, 韦 春, 樊 新.聚苯胺包覆纤维素纳米晶/石墨烯复合电极材料的制备与性能[J].高分子材料科学与工程,2017,33(11):166-170. Hongxia Liu, Yang Xu, Changbing Zhou, Chun Wei, Xin Fan. Preparation and Properties of Polyaniline Coated Cellulose Nanocrystals/Graphene Composite Electrode Materials[J]. Polymer Materials Science & Engineering,2017,33(11):166-170.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-11-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司