填料绢云母对聚己二酸丁二醇酯复合材料多晶结构的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21204045);陕西省自然科学基础研究计划(2016JM2020)


Effects of Sericite Filler on Polymorphic Structures of Poly(butylene adipate)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过溶液浇铸法制备了聚己二酸丁二醇酯(PBA)/绢云母微粒复合材料。使用差示扫描量热、广角X射线衍射、偏光显微镜等手段研究了绢云母微粒/PBA复合材料中PBA结晶行为、多晶结构以及晶体形貌。结果表明,绢云母作为成核剂有效地增加PBA晶体成核密度、降低晶体尺寸。在较高的降温速率和较低的结晶温度下依然能生成稳定的α晶体,对比纯PBA在25 ℃的晶体类型,加入质量分数1%绢云母微粒后有生成α晶体结构存在。因此通过控制降温速率和添加绢云母微粒能够起到调控PBA多晶型结构。

    Abstract:

    The poly(butylene adipate) (PBA)/sericite particulates composites were prepared by solution-casting method. The effects of sericite particles on the nonisothermal and isothermal crystallization, polymorphic structure, and morphology on PBA were investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), and polarized optical microscopy (POM). Sericite particulates are effective nucleating agents for the enhanced nucleation density and decreased spherulite size of PBA. The result of differential scanning calorimetry (DSC) shows that sericite particulates can induce formation of the thermodynamically stable α-form of PBA crystals under different conditions. Compared to pure PBA at 25 ℃, the α-form crystals would not disappear with the addition of 1% sericite. The formation of polymorphic crystals of PBA may be regulated by changing cooling rate and the sericite particulates loading, which provides an efficient way to control the polymorphic structures.

    参考文献
    相似文献
    引证文献
引用本文

王海军, 王帅毅, 王学川.填料绢云母对聚己二酸丁二醇酯复合材料多晶结构的影响[J].高分子材料科学与工程,2017,33(12):65-70. Haijun Wang, Shuaiyi Wang, Xuechuan Wang. Effects of Sericite Filler on Polymorphic Structures of Poly(butylene adipate)[J]. Polymer Materials Science & Engineering,2017,33(12):65-70.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2017-12-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司