Abstract:The composites of blending flash aluminum flake pigments with high density polyethylene (HDPE) can be directly made into metallic flash plastic parts by injection molding. The influence of the pigments content on the reflectance and color parameters of the metallic flash effect plastic parts were studied by influencing the thermal conductivity, crystallinity and surface topography of the parts. Meanwhile, the orientation of aluminum flakes, the surface morphology and micro shrinkage of the parts were revealed by SEM and AFM. The results show that the reflectance, whiteness index (WI) and luminance (L*) increase as the content of the pigments increases. When the HDPE blend content is 5% pigments, the maximum reflectance increases from 25% to 52%, which is more than double. Moreover, the flash flake aluminum pigments improve the thermal conductivity and crystallinity of composites, which improves the reflectance, WI and L*. The micro shrinkage around the leafing of aluminum flakes causes micro sink marks, but higher content of the pigments can inhibit micro shrinkage. As the content of the pigments increases, the surface roughness and length of the micro sink marks become smaller.