端羟基聚二甲基硅氧烷改性环氧树脂基形状记忆材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

北京卫星制造厂重点攻关科技项目(2014ZY609029)


Hydroxyl-Terminated Polydimethylsiloxane Modified Shape Memory Epoxy Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    氢化双酚A型环氧树脂(AL-3040)与端羟基聚二甲基硅氧烷(HTPDMS)在偶联剂(KH-550)作用下反应制得AL-3040环氧树脂- HTPDMS嵌段共聚物。以此共聚物作为增容剂改善AL-3040与HTPDMS之间的相容性,引入柔性Si-O-Si链段对环氧树脂进行增韧改性,以甲基六氢苯酐(MeHHPA)为固化剂,制备了一种高性能HTPDMS改性形状记忆环氧树脂(SMEP)。研究发现,HTPDMS能明显改善AL-3040环氧树脂韧性。随着增容剂用量的增加,SMEP的拉伸强度和玻璃化温度(Tg)随之下降,冲击强度、断裂伸长率逐渐上升。随着增容剂用量增加,SMEP的形状固定率随之下降,形状回复率呈上升趋势。重复10次形状记忆性能测试,形状固定率和形状回复率保持在96%以上。

    Abstract:

    AL-3040 epoxy resin and hydroxyl-terminated polydimethylsiloxane (HTPDMS) were condensed with coupling agent (KH-550) to form AL-3040 epoxy resin-HTPDMS block copolymer. Then, the copolymer was employed as compatibilizer and blended with AL-3040 epoxy resin at different ratios. Subsequently, the blend was cured by methylhexahydrophthalic anhydride (MeHHPA) to form HTPDMS modified shape memory epoxy resin (SMEP). The Si-O-Si flexible chains were introduced into AL-3040 epoxy resin structure for toughing modification. With increasing dosage of compatibilizer, the tensile strength and glass transition temperature (Tg) of SMEP are decreased, whereas the impact strength and elongation at break are increased. Shape memory tests show that shape recovery rate increases with increasing dosage of compatibilizer. However, the shape retention rate exhibits decline tendency with increasing content of compatibilizer. The shape retention rate and shape recovery rate still maintain at 96% or more after 10 times of shape memory tests.

    参考文献
    相似文献
    引证文献
引用本文

李芝华, 胡建康, 陈 明, 马 力, 刘洪新, 张玉生, 张 明.端羟基聚二甲基硅氧烷改性环氧树脂基形状记忆材料[J].高分子材料科学与工程,2018,34(1):160-165. Zhihua Li, Jiankang Hu, Ming Chen, Li Ma, Hongxin Liu, Yusheng Zhang, Ming Zhang. Hydroxyl-Terminated Polydimethylsiloxane Modified Shape Memory Epoxy Resin[J]. Polymer Materials Science & Engineering,2018,34(1):160-165.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-01-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司