细菌纤维素气凝胶ARGETATRP接枝聚甲基丙烯酸缩水甘油酯
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21302011)


Grafting Poly(glycidyl methacrylate) on Bacterial Cellulose Aerogels by ARGET ATRP
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以含溴的细菌纤维素气凝胶为引发剂,维生素C(Vc)为还原剂,N,N,N′,N,′N″-五甲基二亚乙基三胺(PMDETA)/溴化铜(CuBr2)为催化剂,通过电子转移活化再生催化剂原子转移自由基聚合(ARGETATRP)方法,制备了含聚甲基丙烯酸缩水甘油酯(PGMA)刷的细菌纤维素气凝胶规整接枝共聚物。采用能谱对大分子引发剂元素含量进行测定,并利用红外光谱、X射线衍射、扫描电镜、热失重分析对其结构和性能进行表征。结果表明,接枝聚合反应可控,大分子引发剂Br元素含量为6.77%;GMA接枝聚合后纤维直径增大且在纤维表面形成覆盖层;起始热分解温度由205℃升高到246℃,热稳定性增强。

    Abstract:

    The regular graft copolymer, BC-g-PGMA was synthesized via electron transfer for atom transfer radical polymerization (ARGET ATRP), using bacterial cellulose aerogels with bromide side-group (BC-Br) as macroinitiator and N,N,N′,N,′N″-pentamethyldiethylenetriamine (PMDETA)/copper(II) bromide (CuBr2) as catalytic system, vitamin C as reducing agent and glycidyl methacrylate (GMA) as comonomer. Spectroscopy (EDS) macroinitiators element content was determined and by infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscope (SEM), thermo-gravimetric analysis (TGA), the structure and properties were characterized. The results indicate that the grafting polymerization of GMA on BC aerogels can be controlled; macroinitiators Br elements can reach 6.77%; the fiber diameter increases after GMA graft polymerization and the coating is formed in the fiber surface layer; the initial thermal decomposition temperature increases from 205 ℃ to 246 ℃, and the thermal stability is improved.

    参考文献
    相似文献
    引证文献
引用本文

刘新华,李 永,储兆洋,杨 旭,王翠娥,钱 勇.细菌纤维素气凝胶ARGETATRP接枝聚甲基丙烯酸缩水甘油酯[J].高分子材料科学与工程,2018,34(2):14-18. Xinhua Liu, Yong Li, Zhaoyang Chu, Xu Yang, Cui′e Wang, Yong Qian. Grafting Poly(glycidyl methacrylate) on Bacterial Cellulose Aerogels by ARGET ATRP[J]. Polymer Materials Science & Engineering,2018,34(2):14-18.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-02-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司