基于相间交联的共混型宽温域阻尼弹性体的制备及机理
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21073066)


Preparation and Damping Mechanism of Polymer Blends with Broad Damping Temperature Range Damping Elastomer Based on Inter-Phase Cross-Linkages
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    结合过氧化物硫化体系的硫化过程,提出过氧化二苯甲酰(BPO)可以引发环氧化天然橡胶(ENR)与邻苯二甲酸二烯丙酯预聚体(DAP-A)发生相间交联反应,以改善两相之间的相容性,拓宽ENR/DAP-A 二元共混材料的有效阻尼温域。分别采用硫磺硫化体系和BPO 硫化体系制备的ENR-40(环氧化程度为40%的ENR/DAP-A 二元共混材料)进行对比分析,并利用动态力学分析、差示扫描量热分析以及宽频介电谱论证了上述机理。基于以上机理,进一步探究了共混比例和BPO 用量对ENR-40/DAP-A 二元共混材料阻尼性能的影响,最终制备了一种有效阻尼温域为-33~145 ℃(tanδmin>0.35)的宽温域高阻尼材料。

    Abstract:

    Based on the vulcanization process of peroxide curing system, dibenzoyl peroxide(BPO) can result in inter-phase linkages by triggering reaction between epoxidized natural rubber(ENR) and prepolymers of diallyl phthalate(DAP-A), thus providing an improved compatibility between phases as well as a broadened effective damping temperature range in ENR/DAP-A binary blends. The proposal was demonstrated by DMA, DSC and broadband dielectric spectroscopy(BDRS) of ENR-40/DAP-A binary blends vulcanized by BPO and sulphur, respectively. On the basis of that, different blending ratios and BPO contents were studied to optimize the damping property of ENR-40/DAP-A binary blends and a series of high damping (tanδmin>0.35) binary blends with an effective temperature range of 178 ℃ from -33 ℃ to 145 ℃ were obtained.

    参考文献
    相似文献
    引证文献
引用本文

程 波,杨一林,李 涛,卢 珣.基于相间交联的共混型宽温域阻尼弹性体的制备及机理[J].高分子材料科学与工程,2018,34(2):129-135. Bo Cheng, Yilin Yang, Tao Li, Xun Lu. Preparation and Damping Mechanism of Polymer Blends with Broad Damping Temperature Range Damping Elastomer Based on Inter-Phase Cross-Linkages[J]. Polymer Materials Science & Engineering,2018,34(2):129-135.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-02-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司