多孔性纤维素无纺布增强聚合物隔膜的制备
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省自然科学基金面上项目(BK20151263);江苏省高校优势学科建设工程(PAPD)


Preparation of Cellulose Nonwoven-Supported Porous Polymer Membranes for Lithium-Ion Batteries
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚乙二醇单甲醚甲基丙烯酸酯(PEGMEMA)为单体,八乙烯基多面体齐聚倍半硅氧烷(OVPOSS)为交联剂,通过紫外光照引发聚合,形成交联结构,并与线型聚偏氟乙烯-六氟丙烯共聚物(PVdF-HFP)形成一种新型的凝胶聚合物隔膜。为了进一步提高聚合物膜的力学强度和电化学性能,用纤维素无纺布和致孔剂对其改性。实验结果表明,改性后隔膜的力学性能、离子电导率和孔隙率都得到明显的提高,拉伸强度最高达到10.6 MPa。与商用聚乙烯膜、单一的PVdF-HFP多孔膜和未用无纺布改性的隔膜比较,聚合物改性后的隔膜在150 ℃仍可以保证尺寸稳定。采用改性隔膜组装的锂离子电池拥有更好的循环和倍率放电性能,在0.5C/0.5C的充放电条件下能够稳定循环,最高放电比容量可达到145mA·h/g。

    Abstract:

    A novel gel polymer membrane was prepared by blend of linear poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) and crosslinked polymer derived from poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) and octaviny-T8-silsesquioxane (OVPOSS) using UV-induced technology. In order to enhance mechanical strength and electrochemical performances, the membrane was modified with cellulose nonwoven and pore-forming agent. The results demonstrate the tensile strength, ionic conductivity and electrolyte uptake of the modified membranes are obviously improved, and the largest tensile strength of the modified membranes reaches 10.6 MPa. The modified membranes exhibit enhanced thermal stability and remain dimensional stability after exposure to 150 ℃. Meanwhile, the cells assembled with modified membranes display better cycle performance and C-rate capability than the other membranes, and the highest discharge capacity reaches 145 mA·h/g under the constant current mode at 0.5 C/0.5 C.

    参考文献
    相似文献
    引证文献
引用本文

胡健康,顾陆铭,张明祖,何金林,倪沛红.多孔性纤维素无纺布增强聚合物隔膜的制备[J].高分子材料科学与工程,2018,34(2):136-142. Jiankang Hu, Luming Gu, Mingzu Zhang, Jinlin He, Peihong Ni. Preparation of Cellulose Nonwoven-Supported Porous Polymer Membranes for Lithium-Ion Batteries[J]. Polymer Materials Science & Engineering,2018,34(2):136-142.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-02-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司