右旋聚乳酸-己内酯无规共聚物改性左旋聚乳酸的结构与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51673003)


Structure and Properties of Toughened Poly(L-Lactide) by Poly(D-Lactide)-r-Poly(ε-caprolactone) Random Copolymer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融密炼的方法制备左旋聚乳酸(PLLA)与右旋聚乳酸-己内酯的无规共聚物(PDLA-r-PCL)共混物。通过热重分析、差示扫描量热、X射线衍射和拉伸测试等技术研究了PDLA-r-PCL含量对PLLA 结构与性能的影响。结果表明,加入PDLA-r-PCL后,共混物中形成了立构晶(SC),且随着PDLA-r-PCL含量的增加,SC的含量逐渐增加;熔融温度对后续PLLA的结晶有较大影响,在220℃熔融后降温,立构晶的存在对后续α晶的形成有一定的促进作用;在28℃拉伸PLLA/PDLA-r-PCL淬冷样品,当无规共聚物的含量达到20%时,其断裂伸长率从纯PLLA的13%增加至440%,即使是退火后的样品,无规共聚物也能显著增加PLLA的韧性,且拉伸应力值变化较小。

    Abstract:

    Poly(L-Lactide)/poly(D-Lactide)-r-poly(ε-caprolactone) (PLLA/PDLA-r-PCL) blends were prepared by melt blending. The effect of PDLA-r-PCL content on the structure and properties of PLLA was systematically investigated by TGA, DSC, XRD and tensile testing. It is found that the stereocomplex crystal (SC) can be formed after adding of PDLA-r-PCL, and its content increases with the increase of PDLA-r-PCL content. The melting temperature has a significant impact on the crystallization behavior of PLLA/ PDLA-r-PCL blends. Upon cooling from 220 ℃, the existence of SC has a nucleation effect on α form. After stretching quenching samples at 28 ℃, the elongation at break of modified PLLA is significantly improved from 13% of pure PLLA to 440% of PLLA/PDLA-r-PCL (80/20). The toughness of PLLA quenched and annealed samples could be enhanced by the addition of PDLA-r-PCL, and tensile stress has fewer changes.

    参考文献
    相似文献
    引证文献
引用本文

李 琦,熊祖江,王 锐,杨春芳,姜 延,张秀芹.右旋聚乳酸-己内酯无规共聚物改性左旋聚乳酸的结构与性能[J].高分子材料科学与工程,2018,34(3):43-47. Qi Li, Zujiang Xiong, Rui Wang, Chunfang Yang, Yan Jiang, Xiuqin Zhang. Structure and Properties of Toughened Poly(L-Lactide) by Poly(D-Lactide)-r-Poly(ε-caprolactone) Random Copolymer[J]. Polymer Materials Science & Engineering,2018,34(3):43-47.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-04-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司