相容剂增容聚对苯二甲酸乙二醇酯/聚乳酸共混物的制备及结晶性能与热性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

福建省教育厅资助项目(JAT160516);福建省科技厅项目(2016H0031)


Preparation and Characterization of Crystallization and Thermal Property of Poly(ethylene terephthalate)and Poly(lactic acid) Blends Promoted by Compatilizer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分别通过扫描电镜(SEM)、差式扫描量热分析(DSC)、X射线衍射(XRD)、热重分析(TG)、核磁共振及红外光谱等研究相容剂种类、含量及聚对苯二甲酸乙二醇酯(PET)/聚乳酸(PLA)配比对PET/PLA 共混物的断面形貌、结晶形态及热性能等的影响。SEM 和DSC结果表明,相容剂乳酸/丁二醇共聚物(PLLA-g-BDO)及用量对PET/PLA 共混物的界面相容影响较大。与未加相容剂比,相容剂使界面从清晰过渡到模糊,界面处未见明显团聚颗粒;相容剂用量为8%时,DSC曲线上仅出现1个熔融峰。DSC和XRD表明,相容剂的引入降低了共混物的结晶度,冷结晶和热结晶过程中分别结晶,结晶的温度范围较宽,热结晶的结晶度大于冷结晶。冷结晶时,柔性链的PLA 先结晶,PET后结晶;热结晶时,结晶温度较大组分PET先结晶,PLA后结晶。TG分析表明PET/PLA配比是材料热稳定性的必要条件。

    Abstract:

    Crystal and phase morphology, thermal properties of poly(ethylene terephthalate) and poly(lactic acid) blends with reactive compatilizer types, contents and different ratio for PET/PLA were investigated by SEM, DSC, XRD, TG, 1H-NMR and FT-IR etc. Results of SEM and DSC show that (PLLA-g-BDO) compatilizer types and contents have better influences on the interface compatibility of PET/PLA blends. With addition of compatilizer, there is a dramatic shift from clear to fuzzy with no obvious reunion particles for the phase, and an unique melting peak in DSC curve appears at the optimum mass of 8% compatilizer. DSC and XRD confirm that they will crystallize individually as cooling from melt, but crystallinity of the latter is more than the former, which reduce the whole crystallinity at a wide range crystallization temperature. When cooled, PLA component with flexible chain will crystallize first; simultaneously, PET component at higher crystallization temperature will crystallize first when melted. TG indicates that the PET/PLA ratio is necessary for thermal stability of materials.

    参考文献
    相似文献
    引证文献
引用本文

邱丽清,刘杭忠,赵升云,刘瑞来.相容剂增容聚对苯二甲酸乙二醇酯/聚乳酸共混物的制备及结晶性能与热性能[J].高分子材料科学与工程,2018,34(3):73-80. Liqing Qiu, Hangzhong Liu, Shengyun Zhao, Ruilai Liu. Preparation and Characterization of Crystallization and Thermal Property of Poly(ethylene terephthalate)and Poly(lactic acid) Blends Promoted by Compatilizer[J]. Polymer Materials Science & Engineering,2018,34(3):73-80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-04-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司