连续化功能中空纤维膜的制备方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(41301542,51678409);天津市科技支撑计划(15ZCZDSF00880)


Continuous Production Method for Functional Hollow Fiber Membranes
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中旨在介绍一种可产业化的中空纤维膜表面功能化方法。通过连续化紫外光辐照接枝法,将亲水性单体丙烯酸(AA)接枝到膜表面,形成亲水接枝层。膜的亲水性受接枝密度的影响,可方便地通过调整卷绕速度、单体浓度和光敏剂浓度等工艺参数来获得合适的接枝密度。随着接枝密度的增大,膜的水接触角降低,纯水通量显著增大,表明亲水性得到了提高。抗污染性实验结果显示,随着接枝密度从0增大到3.54mmol/m2,膜的总污染系数从0.647下降到0.377,不可逆污染系数从0.5减小到0.097,纯水通量恢复率从49.98%增加到90.30%,部分不可逆污染可转变为可逆污染,从而通过水力反清洗的方法除去,表明经过连续紫外辐照接枝亲水改性后,膜的抗污染性得到了显著的提高。

    Abstract:

    This study aimed to introduce a method for manufacturing functional membranes which can be easily industrialized. A continuous UV photografting system was developed to modify the hydrophilic membrane. The internal structure of UV reactor was designed emphatically. It is found that the hydrophilicity of membranes is influenced by graft density (GD), and the desired GD can be achieved by adjusting the grafting conditions, such as line rate, acrylic acid (AA) concentration and benzophenone (BP) concentration. The pure water flux significantly increases with the increase of GD, while the water contact angle decreases, which indicates that the hydrophilicity of membranes is improved. Fouling test reveals that the total fouling (Rt) is decreased from 0.647 to 0.377 with the increase of grafting density from 0 to 3.54 mmol/m2, and correspondingly the irreversible fouling (Rir) is dropped from 0.5 to 0.097 dramatically, while the flux recovery ratio is increased from 49.98% to 90.30%. Most of irreversible fouling is converted to reversible fouling (Rr), which could be removed by hydraulic cleaning. Results show that the antifouling performance of membranes is enhanced significantly after continuous UV photografting polymerization.

    参考文献
    相似文献
    引证文献
引用本文

郭艳芬,廖小深,魏俊富,迟春亮,赵孔银,王晓磊.连续化功能中空纤维膜的制备方法[J].高分子材料科学与工程,2018,34(3):116-121. Yanfen Guo, Xiaoshen Liao, Junfu Wei, Chunliang Chi, Kongyin Zhao, Xiaolei Wang. Continuous Production Method for Functional Hollow Fiber Membranes[J]. Polymer Materials Science & Engineering,2018,34(3):116-121.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-04-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司