基于低相对分子质量聚己内酯原位反应增容制备超韧聚乳酸
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

宁波市重点项目(2014B10023)


Super-Tough Polylactide with Low Molecular Weight Poly(ε-caprolactone) by In Situ Reactive Compatibilization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用低相对分子质量聚己内酯二元醇(PCL-OH500)与4,4′-二苯基甲烷二异氰酸酯(MDI)反应共混增韧聚乳酸(PLA)。扫描电镜的表征结果表明,在PLA/PCL-OH500/MDI共混物中,PCL-OH500与MDI原位反应生成的聚氨酯为分散相,PLA为连续相。采用差示扫描量热分析和热重分析研究了共混物的热性能。相比于纯PLA,PLA/PCLOH500/MDI共混物热稳定性稍有下降。获得的PLA/PCL-OH500/MDI(80/20/0.5)显示了较好的韧性,其断裂伸长率相比纯PLA的5.33%增加了约10倍(48.51%),而拉伸强度和弹性模量仅稍有下降。其增韧机理是分散相颗粒从基体中剥离产生了孔洞,诱导了剪切屈服引起基体塑性形变。

    Abstract:

    Low molecular weight poly(ε-caprolactone) diols (PCL-OH500) was used to toughen polylactide (PLA) with 4,4′-diphenylmethanediisocyanate (MDI) by reactive blend. In the PLA/PCL-OH500/MDI blend, polyurethane derived from reaction of PCL-OH500 and MDI was dispersed phase and PLA was continuous phase, which was observed in the SEM images. DSC and TGA were employed to study the thermal properties of the blend. The thermal stability of the blend is slightly reduced compared to pure PLA. The resulting PLA/PCL-OH500/MDI(80/20/0.5) blend shows super toughness, and the elongation at break is improved by 10 times to 48.51%, compared to 5.33% of pure PLA, while the corresponding yielding strength and elastic modulus display slightly decrease. The toughening mechanism of PLA/PCL-OH500/MDI blend is plastic deformation of the matrix caused by cavitation, arising from dispersed phase particles debonding from the matrix.

    参考文献
    相似文献
    引证文献
引用本文

罗 婷,顾 林,苏胜培,余海斌.基于低相对分子质量聚己内酯原位反应增容制备超韧聚乳酸[J].高分子材料科学与工程,2018,34(3):122-126. Ting Luo, Lin Gu, Shengpei Su, Haibin Yu. Super-Tough Polylactide with Low Molecular Weight Poly(ε-caprolactone) by In Situ Reactive Compatibilization[J]. Polymer Materials Science & Engineering,2018,34(3):122-126.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-04-03
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司