淬火致内应力对聚羟基丁酸戊酸酯薄膜结晶行为影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51603107);宁波市自然科学基金资助项目(2016A10099)


Effect of Rapid Cooling Induced Internal Stress on the Crystallization of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过对聚羟基丁酸戊酸酯(PHBV)薄膜进行低温淬火使薄膜形成不均匀内应力场,研究淬火致内应力对薄膜结晶行为的影响。用偏光显微镜对淬火样品结晶行为的研究结果表明,PHBV在90 ℃等温结晶形成环带球晶,但经低温淬火后再在90 ℃等温结晶却能形成取向结晶结构:当淬火温度(Tq)为-196 ℃时,形成横晶;当Tq为-80 ℃时,形成2种不同成核密度结晶结构;而Tq高于-20 ℃,只形成球晶。对横晶结构进行扫描电镜和X射线衍射表征,结果都显示片晶垂直于薄膜表面生长,表明结晶时分子链与薄膜平行,也进一步说明内应力是形成横晶结构的主要因素。

    Abstract:

    The effect of internal stress on the crystallization behavior of the poly(3-hydroxybutyrate-co-3-hydroxyvalerate)(PHBV) film was studied by the low temperature quenching which cause an inhomogeneous internal stress field in the film. The results of the study of crystallization behavior after quenching by polarized light microscope show that banded spherulites are formed when PHBV is isothermal crystallized at 90 ℃, but after quenching at low temperature and then isothermal crystallization at 90 ℃, oriented crystallites are found. When the quenching temperature (Tq) is -196 ℃, transcrystallites are formed. When Tq is -80 ℃, two crystalline structures with different nucleation densities are formed. When Tq is higher than -20 ℃, only spherulites are formed. The results of SEM and X-ray on the transcrystalline structure show that lamellae are perpendicular to the film which indicates that polymer chains are parallel to the film and that the internal stress is the main factor to form the transcrystalline structure.

    参考文献
    相似文献
    引证文献
引用本文

杜庆华, 杨 建, 明 亮, 顾 群.淬火致内应力对聚羟基丁酸戊酸酯薄膜结晶行为影响[J].高分子材料科学与工程,2018,34(4):99-103. Qinghua Du, Jian Yang, Liang Ming, Qun Gu. Effect of Rapid Cooling Induced Internal Stress on the Crystallization of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Film[J]. Polymer Materials Science & Engineering,2018,34(4):99-103.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-05-04
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司