含硼聚碳硅烷的制备及热解行为
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省自然科学基础研究计划青年人才项目(2016JQ5098); 陕西省科技厅自然科学重大基础研究项目(2017ZDJC-22); 陕西省教育厅专项科研计划(17JK0380)


Synthesis and Pyrolysis of Boron-Containing Polycarbosilane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为制备陶瓷产率高、高温性能优良的碳化硅(SiC)陶瓷先驱体,利用频那醇硼烷(PINB)与聚碳硅烷(PCS)的脱氢偶合反应,对聚碳硅烷进行化学改性。改变PINB与PCS的质量比(1∶20、1∶10、1∶5),制备了一系列不同硼(B)含量的含硼聚碳硅烷(PBCS)。通过傅里叶变换红外光谱分析、核磁共振氢谱分析、热重分析以及X射线衍射分析等手段研究了PBCS的组成、结构及热解行为。结果表明,通过B-H键的反应将B元素以PINB骨架形式引入PCS结构;引入B元素可以将PCS的陶瓷产率从78%提高至92%;另外,B元素的引入引起PCS的交联,PBCS的热解过程分3个阶段。同时B元素的引入抑制了SiC晶体的生长,将材料的耐温性能提高至1400 ℃。

    Abstract:

    In order to obtain precursor with high ceramic yield and silicon carbide (SiC) products with excellent thermal stability, pinacolborane (PINB) was introduced to modify polycarbosilane (PCS). Dehydrogenation reaction was concerned. Several boron-containing polycarbosilanes (PBCS) were prepared with different mass ratio between PINB and PCS (1∶20, 1∶10, 1∶5). FT-IR, 1H-NMR, TGA and XRD were used to characterize the samples. It demonstrates that boron is introduced to the PCS structure by dehydrogenation reaction as PINB backbone. The introduction of boron might increase the ceramic yield of precursor from 78% to 92%. And the cross-inking reaction of PCS is also enhanced by PINB. Results demonstrate that the pyrolysis process of PBCS includes three stages. Moreover, the growth of SiC crystals is inhibited, due to introduction of boron. And the high temperature heat resistance of B-containing SiC ceramics is enhanced to 1400 ℃.

    参考文献
    相似文献
    引证文献
引用本文

马爱洁, 罗瑞盈, 杨晶晶, 陈卫星, 冯 超.含硼聚碳硅烷的制备及热解行为[J].高分子材料科学与工程,2018,34(4):110-115. Aijie Ma, Ruiying Luo, Jingjing Yang, Weixing Chen, Chao Feng. Synthesis and Pyrolysis of Boron-Containing Polycarbosilane[J]. Polymer Materials Science & Engineering,2018,34(4):110-115.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-05-04
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司