激光微加工技术制备浸润性可控聚四氟乙烯超疏水表面
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51272082);国家自然科学基金青年基金资助项目(21603070)


Fabrication of Polytetrafluoroethylene Superhydrophobic Surface with Controllable Wettability by Laser Micromaching Technology
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    使用CO2激光器对聚四氟乙烯(PTFE)表面进行微加工,通过设计需要加工的图案,对加工间距、功率和加工次数等参数的控制,能获得浸润性可控的超疏水表面。扫描电子显微镜和接触角测量用于表征表面形貌结构和润湿性。研究了激光不同加工间距、不同加工功率及不同加工次数对表面浸润性和表面形貌的影响。结果表明,制备的超疏水表面各向异性程度随着条纹间距的增大而增大,使用不同的功率加工5次可实现相同的各向同性结构,相同条件下加工4次可以实现各向异性向各向同性的转变。CO2激光微加工技术可用于大规模加工制备超疏水表面,进而用于微流控器件、定向集水及减阻、实验室芯片系统等领域。

    Abstract:

    The superhydrophobic surface with controllable wettability was fabricated by CO2 laser micromaching polytetrafluoroethylene(PTFE) through designing pattern needed to be processed and controlling the parameters of processing spacing, power and number of times. The structure and wettability of the surface were characterized by scanning electron microscope(SEM) and contact angle measuring instrument. The effects of different stripes spacing, processing power and processing number of times on surface wettability and morphology were studied. The experimental results show that the degree of anisotropy of as-prepared superhydrophobic surface increases with the increase of stripe spacing, the similar isotropic structure can be achieved by processing five times at different processing power, processing four times can achieve a transformation from anisotropy to isotropy under the same conditions. CO2 laser micromaching technology can be used for large-scale preparation of superhydrophobic surface for microfluidic devices, directional water harvesting and drag-reduction, lab-on-chips system and other fields.

    参考文献
    相似文献
    引证文献
引用本文

占彦龙, 李 文, 李 宏, 胡良云.激光微加工技术制备浸润性可控聚四氟乙烯超疏水表面[J].高分子材料科学与工程,2018,34(4):147-151. Yanlong Zhan, Wen Li, Hong Li, Liangyun Hu. Fabrication of Polytetrafluoroethylene Superhydrophobic Surface with Controllable Wettability by Laser Micromaching Technology[J]. Polymer Materials Science & Engineering,2018,34(4):147-151.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-05-04
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司