Abstract:Aromatic polyoxadiazole (POD) was synthesized by using terephthalic acid and hydrazine sulfate as monomers, fuming sulfuric acid as solvent and dehydrating agent. POD films were obtained from wet forming in coagulation bath (water and sulfuric acid solution) and the effects of concentration and temperature of coagulation bath on the structure and properties of the films were studied. According to the results, when the concentration of H2SO4 in the coagulation bath increases, the surface morphology of the films gradually becomes dense and the crystallinity decreases gradually, and the mechanical properties and breakdown strength are gradually increased. When the mass fraction of H2SO4 is 40%, the structure and performance of the film are the best. When the temperature of the coagulation bath is increasing, the film forming process is slowing down, the crystallinity is decreased, the mechanical properties are gradually decreased, and the moisture absorption rate is gradually increased. When the temperature is 30 ℃, the performance is the best.