梯度结构设计对三元乙丙橡胶发泡材料性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Gradient Structure Design on the Properties of EPDM Foamed Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    改变过氧化二异丙苯(DCP)用量制备不同发泡密度的三元乙丙橡胶(EPDM)发泡材料,并且通过叠层法制备发泡密度沿厚度方向呈梯度变化的EPDM梯度发泡材料。考察了发泡密度和梯度结构设计对EPDM混炼胶的硫化发泡特性、硫化胶的泡孔微观形态、力学性能、压缩应力-应变性能以及能量吸收特性的影响。结果表明,随着DCP用量的增大,发泡材料密度增大,发泡倍率降低,力学性能得以改善。与发泡密度最低的最外层均质发泡EPDM材料相比,梯度发泡材料的拉伸强度和100%定伸应力提高,断裂伸长率下降,压缩弹性模量增大。梯度结构设计影响发泡材料吸能值和能量吸收效益达到最优的极值。因此,梯度发泡材料在合适的应力范围内可以不牺牲力学性能,同时获得最大的吸能能力。

    Abstract:

    The EPDM foam materials with different foaming densities were fabricated by using dicumyl peroxide (DCP) as variables. The samples with different foaming densities were compounded by lamination method.The curing-foaming characteristics, morphology and mechanical properties, compressive stress-strain properties and energy-absorption characteristics of EPDM were studied. The results show that the tensile strength and modulus at 100% offunctionally graded foam are greatly improved compared to uniform distribution EPDM. In a range of stress, the efficiency of energy absorption and ideality of functionally graded foam increase most, in addition the performances are better than those of any uniform distribution samples.In the appropriate range of use, the functionally graded foam not only obtains the best energy absorption characteristics, but also has acceptable mechanical properties.

    参考文献
    相似文献
    引证文献
引用本文

杨 鎏, 王 鹤, 赵树高.梯度结构设计对三元乙丙橡胶发泡材料性能的影响[J].高分子材料科学与工程,2018,34(5):59-64. Liu Yang, He Wang, Shugao Zhao. Effect of Gradient Structure Design on the Properties of EPDM Foamed Material[J]. Polymer Materials Science & Engineering,2018,34(5):59-64.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-05-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司