Cu/碳纳米纤维负载脂肪酸定形相变材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划资助项目(2017YFB0309100);中央高校基本科研业务费专项资金资助项目(No.JUSRP51621A);江苏高校“青蓝工程”优秀青年骨干教师培养对象资助项目(苏教师[2016]15号);江苏省研究生科研创新计划项目(KYCX17-1472);江苏省双创计划项目(苏人才办[2015]26号);江南大学国家大学生创新训练计划项目(201610295043)


Preparation and Property of Form-Stable Phase Change Materials Consisting of Copper/Carbon Nanofibrous MatsAbsorbed with Fatty Acid
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    结合静电纺丝、物理吸附、预氧化炭化和原位还原的技术与原理,制备了3种不同铜纳米粒子含量的Cu/碳纳米纤维膜(Cu/CNFs1~3),从此作为定形相变材料(FSPCM)的支撑基体;根据最低共熔点理论和Schrader方程计算出月桂酸-肉豆蔻酸-硬脂酸(LA-MA-SA)三元脂肪酸的质量比例,用作制备FSPCM的相变物质。通过物理吸附法制备了Cu/CNFs负载LA-MA-SA的FSPCM1~3。探讨了不同铜纳米粒子含量的CNFs对FSPCM形貌与导热性能的影响。结果表明,FSPCM1~3的熔融时间分别缩短了23.0%、51.8%和38.2%,结晶时间分别缩短了47.8%、64.0%和62.6%。制备的FSPCM1~3的熔融相变温度和熔融热焓在32~36 ℃和88~122 kJ/kg之间,结晶相变温度和结晶热焓分别在24~26 ℃和89~120.9 kJ/kg之间。

    Abstract:

    Combined the technique and principle of electrospinning, physical adsorbing, preoxidation/carbonization and in-situ reduction, three kinds of copper/carbon nanofibrous mats (Cu/CNFs1~3) consisting of different content of nanoparticles were fabricated. The prepared Cu/CNFs was used as supporting material of form-stable phase change materials (FSPCM); based on the lowest eutectic point theory and Schrader equation, the mass ratio of lauric acid (LA), myristic acid (MA) and stearic acid (SA) was calculated. The LA-MA-SA ternary fatty acid eutectic mixture was fabricated as model PCM for preparation of FSPCM. Then, electrospun Cu/CNFs mats absorbed with LA-MA-SA ternary eutectic mixture were studied tofabricate FSPCM1~3. The effect of different content of Cu nanoparticleson morphology and thermal conductivity of FSPCM was studied. The melting time of the FSPCM1~3 was respectively reduced about 23.0%, 51.8% and 38.2%, freezing time was respectively reduced about 47.8%, 64.0% and 62.6%. The melting temperatures and enthalpies of FSPCM1~3 are in the range of 32~36 ℃ and 88~122 kJ/kg, respectively. The crystallization temperatures and enthalpies of FSPCM1~3 are in the range of 24~26 ℃ and 89~120.9 kJ/kg, respectively.

    参考文献
    相似文献
    引证文献
引用本文

宋肖飞, 黄 聪, 谷 滢, 蔡以兵, 魏取福, 刘 伟. Cu/碳纳米纤维负载脂肪酸定形相变材料的制备与性能[J].高分子材料科学与工程,2018,34(5):155-160. Xiaofei Song, Cong Huang, Ying Gu, Yibing Cai, Qufu Wei, Wei Liu. Preparation and Property of Form-Stable Phase Change Materials Consisting of Copper/Carbon Nanofibrous MatsAbsorbed with Fatty Acid[J]. Polymer Materials Science & Engineering,2018,34(5):155-160.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-05-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司