UV混杂固化生物基没食子酸环氧丙烯酸树脂制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河北省高层次人才资助项目(A201400504)


Preparation and Properties of UV Hybrid Curing Biobased Gallic Acid Epoxy Acrylic Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中以廉价、防腐没食子酸为原料,制备了没食子酸环氧丙烯酸树脂(GA-EA)。运用红外光谱、透射电镜、热重分析、动态力学热分析和差示扫描量热分析对样品进行了结构分析和测试,并研究了材料在改性剂三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)不同添加量时的力学性能、热性能及混杂固化的动力学,测试了其玻璃化转变温度 (Tg)和材料的毒性。结果表明,没食子酸环氧丙烯酸树脂可快速进行固化反应,且随着TMPTMA含量的增加,材料的力学性能增强,Tg也随之升高,50% TMPTMA的Tg为97.7 ℃,比纯样品提高40.9 ℃;体系的平均表观活化能(Ea)可降低近80 kJ/mol,细胞成活率为88%以上,说明材料无毒。有望开发成医用环保(例如补牙)高分子材料。

    Abstract:

    The research and development of green, environment-friendly and renewable biomaterials with high performance has become the focus of researchers. In this paper, gallic acid epoxy-acrylic resin(GA-EA)was prepared from the cheap, anticorrosive gallic acid. And the structure of GA-EA was analyzed and tested by FT-IR, TEM, TGA, DMA and DSC. The mechanical properties, thermal properties and the kinetics of GA-EA modified trimethylolpropane trimethacrylate (TMPTMA) hybrid curing were studied. The glass-transition temperature (Tg) and toxicity of the materials were tested. The results show that GA-EA could be cured quickly; the mechanical properties of the materials also increase with the increase of TMPTMA content; Tg of the GA-EA/TMPTMA composites with 50% TMPTMA is 97.7 ℃, which is 40.9 ℃ higher than that of the pure samples. The average apparent activation energy Ea of the system can be reduced by nearly 80 kJ / mol; the cell survival rate is above 88% and the material is non-toxic. It can be developed as a medical environmental protection macromolecular material (e.g.Dental prosthesis).

    参考文献
    相似文献
    引证文献
引用本文

申 奇, 董 阳, 魏桂丽, 韩宏哲, 徐建中, 霍 莉. UV混杂固化生物基没食子酸环氧丙烯酸树脂制备及性能[J].高分子材料科学与工程,2018,34(5):166-169. Qi Shen, Yang Dong, Guili Wei, Hongzhe Han, Jianzhong Xu, Li Huo. Preparation and Properties of UV Hybrid Curing Biobased Gallic Acid Epoxy Acrylic Resin[J]. Polymer Materials Science & Engineering,2018,34(5):166-169.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-05-29
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司