功能性单体对聚丙烯酸酯乳胶膜防腐性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省重点研发计划(2018ZDXM-GY-118);陕西科技大学科研创新团队项目(TD12-03)


Effect of Functional Monomers on the Corrosion Resistance of Polyacrylate Latex Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用半连续种子乳液聚合法以甲基丙烯酸甲酯、丙烯酸丁酯为主单体,同时引入苯乙烯、丙烯酸、甲基丙烯酸缩水甘油酯、丙烯酸羟乙酯、羟基磷酸酯等功能性单体,合成防腐型核壳聚丙烯酸酯乳液,并研究了丙烯酸用量及羟基磷酸酯用量对聚丙烯酸酯乳胶膜防腐性能的影响。结果表明,所合成的乳液粒径在100 nm左右,乳胶粒分散均匀。当丙烯酸用量为2%、羟基磷酸酯用量为4%时,所制备的聚丙烯酸酯乳液在金属表面形成的涂层防腐性能最优,其附着力可达0级、无闪蚀、铅笔硬度为2H。

    Abstract:

    Anticorrosion core-shell polyacrylate emulsion was prepared by semi continuous seeded emulsion polymerization using methyl methacrylate and butyl acrylate as main monomers, styrene, acrylic acid, glycidyl methacrylate, hydroxyethyl acrylate and hydroxyl phosphate as functional monomers. Meanwhile, the effects of the dosage of acrylic acid and hydroxyl phosphate on the anticorrosion properties of polyacrylate latex film were investigated. The results show that the particle size of the emulsion is about 100 nm, and the latex particles are dispersed evenly. When the dosage of acrylic acid and hydroxyl phosphate is 2% and 4%, respectively, the corrosion resistance of the polyacrylate latex film is the best. The adhesion and pencil hardness of the film are up to 0 and 2H, moreover, there is no flash.

    参考文献
    相似文献
    引证文献
引用本文

鲍 艳, 陈 颖.功能性单体对聚丙烯酸酯乳胶膜防腐性能的影响[J].高分子材料科学与工程,2018,34(6):75-80. Yan Bao, Ying Chen. Effect of Functional Monomers on the Corrosion Resistance of Polyacrylate Latex Film[J]. Polymer Materials Science & Engineering,2018,34(6):75-80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-07-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司