基于壁面滑移的薄壁注塑流动三维数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21664002);江西省自然科学基金资助项目(20142BAB206030)


Three-Dimensional Numerical Simulation of Thin-WallInjection Molding Flow Based on Wall Slip
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于壁面滑移速度模型,且考虑黏度的压力依赖性,运用三维有限元数值模拟技术,对薄壁注塑流动过程进行数值模拟,研究壁面滑移对厚度方向熔体速度分布、注射时间、注射压力和锁模力的影响。结果表明,壁面滑移对薄壁注塑流动过程具有重要的影响。通过模拟结果与实验结果进行对比,以验证数值模拟结果的可靠性。结果还表明,只有同时考虑壁面滑移效应和黏度的压力依赖性,才能更准确地描述薄壁注塑流动过程。

    Abstract:

    Based on the wall slip velocity model, and considering the pressure dependence of viscosity, three-dimensional finite element method was employed to simulate the thin-wall injection molding flow, and the effects of wall slip on the melt velocity in thickness direction, injection time, injection pressure and clamping force were investigated. the results show that wall slip has important influence on thin-wall injection molding process. The numerical simulation results were verified by comparing with the experimental results, which also indicates that the wall slip effect and the pressure dependence of viscosity should be considered simultaneously in order to better describe the thin-wall injection molding flow numerically.

    参考文献
    相似文献
    引证文献
引用本文

柳和生, 江青松, 王都阳, 赖家美, 黄兴元.基于壁面滑移的薄壁注塑流动三维数值模拟[J].高分子材料科学与工程,2018,34(6):122-126. Hesheng Liu, Qingsong Jiang, Duyang Wang, Jiamei Lai, Xingyuan Huang. Three-Dimensional Numerical Simulation of Thin-WallInjection Molding Flow Based on Wall Slip[J]. Polymer Materials Science & Engineering,2018,34(6):122-126.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-07-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司