硅烷化氧化石墨烯/呋喃树脂复合材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技支撑计划课题(2015BAB07B04);教育部留学回国人员科研启动基金(教外司留[2014]1685); 矿区环境污染控制与修复湖北省重点实验室开放基金(2017109)


Preparation and Properties of Silanized Graphene Oxide/Furan Resin Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用硅烷偶联剂KH570对氧化石墨烯进行改性得到硅烷化氧化石墨烯(KGO),再通过溶液共混法制备了KGO/呋喃树脂复合材料。利用红外光谱、X射线衍射和扫描电子显微镜等方法对KGO和KGO/呋喃树脂复合材料的微观结构和相态进行了表征,并研究了KGO对呋喃树脂的热性能和力学性能的影响。结果表明,KH570成功地接枝到GO分子上得到KGO,且KGO在呋喃树脂基体中具有良好的分散性。KGO/呋喃树脂复合材料的热性能得到显著提高,其弹性模量和拉伸强度较纯呋喃树脂分别增加了384.9 MPa和6.3 MPa。

    Abstract:

    Silanized graphene oxide (KGO) was prepared from graphene oxide modified with silane coupling agent KH570, and then KGO/furan resin composites were prepared by solution blending. The microstructure and morphology of KGO and KGO/furan resin composites were characterized by FT-IR, XRD and scanning electron microscopy (SEM). The effects of KGO on the thermal properties and mechanical properties of furan resin were studied. The results show that KH570 is successfully grafted on GO. KGO has good dispersity in furan resin matrix. The thermal property of furan resin composites is enhanced markedly. Compared with pure furan resin, the elastic modulus and tensile strength of KGO/furan resin composites are improved by 384.9 MPa and 6.3 MPa, respectively.

    参考文献
    相似文献
    引证文献
引用本文

李 琛, 晏石林, 李胜方, 王小波, 余 波.硅烷化氧化石墨烯/呋喃树脂复合材料的制备及性能[J].高分子材料科学与工程,2018,34(6):134-138. Chen Li, Shilin Yan, Shengfang Li, Xiaobo Wang, Bo Yu. Preparation and Properties of Silanized Graphene Oxide/Furan Resin Composites[J]. Polymer Materials Science & Engineering,2018,34(6):134-138.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-07-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司