多臂聚-D-乳酸的合成与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省重大科技支撑计划(工业)与自主创新项目(BE2014881);江苏省盐化工新材料工程实验室开放基金(2065031701)


Synthesis and Characterization of Multiarm Poly(D-lactide)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以右旋丙交酯(D-LA)与八环氧笼型多面体低聚倍半硅氧烷(EPOSS)为原料,辛酸亚锡(Sn(Oct)2 )为催化剂,无水二甲苯为溶剂,通过原位开环聚合法制备多臂聚-D-乳酸(PDLA-EPOSS),通过红外光谱、核磁共振、X射线衍射、凝胶渗透色谱、动态力学分析和热重分析研究了不同含量EPOSS对PDLA-EPOSS的化学结构、晶体结构、分子链结构、重均相对分子质量及其分布(PDI)和性能的影响。结果表明,成功合成了具有多臂支化结构、晶体结构与PDLA 相同、相对分子质量可控且相对分子质量分布较窄、热稳定性良好的PDLA-EPOSS共聚物。并且随着EPOSS含量的增加,PDLAEPOSS的重均相对分子质量先增加后减小、PDI增加、储能模量与损耗因子增加,热分解温度先升高后下降。在EPOSS摩尔分数为5.0×10-5%时,共聚物的相对分子质量与热分解温度最高,分别为1.27×106、287.73 ℃。这些结果对于研究PDLA-EPOSS对PLLA结晶性能的影响有一定的参考价值。

    Abstract:

    Using right-handed lactide (D-LA) and eight cage epoxy polyhedral oligomeric silsesquioxane (EPOSS) as raw materials, stannous octoate (Sn(Oct)2) as catalyst and the multiarm poly(D-lactide) (PDLA-EPOSS) was prepared by in-situ ring-opening polymerization. The chemical structure, crystal structure, molecular chain structure, weight average molecular weight, molecular weight distribution and properties of PDLA-EPOSS copolymers were characterized by Fourier transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (1H-NMR), X-ray diffraction (XRD), gel permeation chromatography (GPC), dynamic thermomechanical analysis apparatus (DMA) and thermogravimetric analysis (TGA). The results show that the PDLA-EPOSS copolymer with multi-arm branched structure and crystal structure is the same as PDLA, and the molecular weight is controlled and the molecular weight distribution is narrow and the thermal stability is good. With the increase of EPOSS content, the average molecular weight of PDLA-EPOSS increases first and then decreases, and the PDI increases, the storage modulus and loss factor increase, and the thermal decomposition temperature increases first and then decreases. When the molar fraction of EPOSS is 5.0×10-5%, the molecular weight and thermal decomposition temperature of the copolymer are 1.27×106 and 287.73 ℃ respectively.

    参考文献
    相似文献
    引证文献
引用本文

邹 俊,李 鑫,徐海青,张宜辉,苏乐乐.多臂聚-D-乳酸的合成与表征[J].高分子材料科学与工程,2018,34(7):35-40. Jun Zou, Xin Li, Haiqing Xu, Yihui Zhang, Lele Su. Synthesis and Characterization of Multiarm Poly(D-lactide)[J]. Polymer Materials Science & Engineering,2018,34(7):35-40.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-08-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司