基于多尺度的生物医用高聚物降解强度模型
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

留学回国人员科研启动基金;国家自然科学基金资助项目(51473019)


Degradation Strength Modeling of Medical Biodegradable Polyesters Based on Multi-Scale Modeling
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    生物医用高聚物由于其良好的性能与降解性,在医学上有广泛的应用前景。降解过程中的强度变化直接影响到应用情况,而降解过程的复杂性使得强度预测困难。文中在分析强度影响因素的前提下,首先由公式推导证明代表性强度模型的不适用性,然后在生物医用高聚物的降解多尺度模型基础上提出针对降解变化过程中出现的异质相的异相强度模型,不同相采用不同的强度公式,并与多尺度模型耦合计算,计算结果与实验数据拟合得很好,表明文中提出的方法正确可行。

    Abstract:

    Biodegradation polyester has a wide range of application prospects in medicine due to their good properties and biodegradability. The change of strength during the degradation process directly affects the situation of application, and the complexity of degradation makes the strength prediction more difficult. In this paper, after analyzing the influence factors of strength, the non-applicability of the representative strength model was proved by formula deduction, and then a heterogeneous phase strength model based on the multi-scale model of the degradation of biodegradation polyesters was proposed. Different strength equations were used in different polymer phases. The proposed strength model is coupled with the multi-scale model, the calculated results fit with experimental data very well, which indicates that the method proposed in this paper is correct and feasible.

    参考文献
    相似文献
    引证文献
引用本文

张桃红,金戈愉,侯斌斌,赵玉凤,周邵楠,曹怒安,张德政.基于多尺度的生物医用高聚物降解强度模型[J].高分子材料科学与工程,2018,34(7):121-125. Taohong Zhang, Geyu Jin, Binbin Hou, Yufeng Zhao, Shaonan Zhou, Nu’an Cao, Dezheng Zhang. Degradation Strength Modeling of Medical Biodegradable Polyesters Based on Multi-Scale Modeling[J]. Polymer Materials Science & Engineering,2018,34(7):121-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-08-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司