结构可控串珠状异质纤维薄膜的制备及在药物释放领域的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation of Structure Controllable Bead-on-String Heterogeneous Fibers and Its Application in Drug Release
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过结合静电喷雾和静电纺丝的方法,运用低浓度的聚乳酸溶液进行静电喷雾制备珠粒,同时用高浓度的聚丙烯腈溶液进行静电纺丝制备纤维,在接收板上成功制得均匀可控的串珠状异质纤维。运用制备得到的串珠纤维加载地塞米松进行药物释放研究,在波长为241nm 处测量载药纤维薄膜在磷酸盐模拟体液中溶出液的吸光度,测得地塞米松随着时间的延长,溶出速度加快,到2h左右时,药物释放量达60%左右,到6h左右已基本全部溶出,具有良好的药物缓释效果。

    Abstract:

    In this paper, by combining the method of electrostatic spraying and electrospinning, controllable bead-on-string heterogeneous fibers were successfully prepared on receiving board, using polylactic acid solution with low concentration for electrostatic spraying, using polyacrylonitrile solution with high concentration for electrospinning at the same time. Finally, the drug release was studied by using prepared bead-on-string fibers loaded with dexamethasone. The absorbance of the drug-containing fiber membrane in the phosphate-simulated body fluid was measured at a wavelength of 241 nm. The results show that the dissolution rate of dexamethasone increases with time, and the drug release is approximately 60% at 2 h. At about 6 h, it is almost completely dissolved, indicating that the drug-loaded fiber membrane has a good drug release effect.

    参考文献
    相似文献
    引证文献
引用本文

张 盼,潘 凯.结构可控串珠状异质纤维薄膜的制备及在药物释放领域的应用[J].高分子材料科学与工程,2018,34(7):167-172. Pan Zhang, Kai Pan. Preparation of Structure Controllable Bead-on-String Heterogeneous Fibers and Its Application in Drug Release[J]. Polymer Materials Science & Engineering,2018,34(7):167-172.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-08-10
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司