聚乳酸/聚(羟基丁酸-羟基戊酸共聚酯)共混物的水降解性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51203141);浙江省科技计划项目(2017C33077);中国与克罗地亚科技合作交流项目(国科外[2017]35号8-25)


Hydrolytic Degradation Properties of Poly(lactic acid)/ Poly(3-hydroxybutyrate-co-hydroxyvalerate) Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了研究聚(羟基丁酸-羟基戊酸共聚酯)(PHBV)的加入对聚乳酸(PLA)降解性能的影响,采用溶液浇铸法制备了不同质量比的PLA/PHBV共混物,对其在不同pH值的PBS缓冲液中降解前后的质量损失率、吸水率、形貌、结晶和热性能变化进行了研究。结果表明,PLA/PHBV共混物的质量损失率和吸水率在碱性缓冲液中增加最快,酸性溶液中次之,中性溶液中最慢;PHBV的加入在碱性缓冲液中促进PLA的降解,在酸性和中性缓冲液中则起阻碍作用;随降解时间的延长,光滑表面变为凹凸不平并出现许多孔洞,共混物的结晶度先提高后降低,其晶型结构未发生改变;降解使共混物的熔融峰向低温偏移。

    Abstract:

    In order to study the effect of poly(3-hydroxybutyrate-co-hydroxyvalerate)( PHBV) addition on the degradation of poly(lactic acid)( PLA), PLA/PHBV blends with different mass ratio were prepared by solution casting method. The mass loss rate, water absorption rate, crystalline structure surface morphology and thermal properties of the buffer solution with different pH were analyzed before and after degradation. The results show that the mass loss rate and water absorption of PLA/PHBV blends increase fastest in alkaline buffer, followed by acidity and slowest in neutral solution. The addition of PHBV promotes the degradation of PLA in alkaline buffer, and is a hindrance in acidic and neutral buffers. As the degradation time increases, the smooth surface becomes uneven and many voids appear. The crystallinity of the blends increases first and then decreases, but the crystalline structure of the blends does not change. The melt peak of the blends shifts to low temperature after degradation.

    参考文献
    相似文献
    引证文献
引用本文

肖爱菊, 于 斌, 孙 辉, 朱斐超, 王明君, 吕振飞.聚乳酸/聚(羟基丁酸-羟基戊酸共聚酯)共混物的水降解性能[J].高分子材料科学与工程,2018,34(8):37-42. Aiju Xiao, Bin Yu, Hui Sun, Feichao Zhu, Mingjun Wang, Zhenfei Lü. Hydrolytic Degradation Properties of Poly(lactic acid)/ Poly(3-hydroxybutyrate-co-hydroxyvalerate) Blends[J]. Polymer Materials Science & Engineering,2018,34(8):37-42.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-09-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司