组合多元醇对用于无土栽培的聚氨酯吸水泡沫的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省研究生培养创新工程 (KYLX16_0581)


Effect of Conjugative Polyalcohol on Polyurethane Foam for Soilless Cultivation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究用羟值配比不同的5种聚醚多元醇对聚氨酯泡沫材料吸水性、保水性的影响。用不同配比的聚醚与甲苯二异氰酸酯(TDI80/40)反应制备预聚体,然后与水、无机填料混合反应,制得聚氨酯无土栽培基质。对所得的聚氨酯泡沫材料进行饱和吸水倍率、总孔隙率、持水孔隙率等理化性质测试,以及力学性能的检测;采用扫描电镜比较基于不同羟值聚醚多元醇聚氨酯发泡材料的泡孔结构。研究结果表明,随着反应中聚醚多元醇羟值的增加,制得的聚氨酯发泡材料的容重越来越小,通气孔隙越大,其吸水性保水性能越好(551%)。

    Abstract:

    The impact of five kinds of different polyether polyol on polyurethane (PU) foams was studied. First of all, the prepolymer was prepared with isocyanate(TDI80/40) and different proportions of polyether, then mixed with water and inorganic filler.The PU foams were prepared which were used for soilless culture. The PU foams were tested by saturated water absorption rate, total porosity, water-holding property and mechanical properties. In addition, the foam was observed by scanning electron microscope(SEM)to compare and contrast the pore structure based on five kinds of different polyether polyol. The results show that when the polyether polyol content increases, the bulk density is getting smaller; and ventilated pores become larger, the water absorption and content properties also become better (551%).

    参考文献
    相似文献
    引证文献
引用本文

马 洁, 王庭慰.组合多元醇对用于无土栽培的聚氨酯吸水泡沫的影响[J].高分子材料科学与工程,2018,34(8):74-78. Jie Ma, Tingwei Wang. Effect of Conjugative Polyalcohol on Polyurethane Foam for Soilless Cultivation[J]. Polymer Materials Science & Engineering,2018,34(8):74-78.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-09-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司