异氰脲酸酯改性聚氯乙烯泡沫的制备与耐热性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家高技术研究发展计划(2015AA033901);国家自然科学基金资助项目(51233005);吉林省重大科技专项(20140203023GX)


Preparation and Heat Resistance of Polyvinyl Chloride Foams Modified with Isocyanurate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以甲苯二异氰酸酯(TDI)为原料,硬脂酸钾为三聚催化剂,采用本体聚合法合成了三聚甲苯二异氰酸酯(tTDI),然后将不同tTDI含量的TDI溶液作为交联剂制备交联聚氯乙烯泡沫材料。通过红外光谱、核磁碳谱分析研究了泡沫制备过程中化学结构的变化以及最终的交联网络。结果表明,在最终泡沫的交联网络中实现了异氰脲酸酯结构的定量引入。动态力学热分析对泡沫玻璃化温度的研究表明,无苯酐的体系中三聚体含量在10%左右出现拐点;有苯酐改性的体系中,泡沫的玻璃化转变温度随着三聚体含量的增加,呈线性升高趋势。

    Abstract:

    The crosslinked polyvinyl chloride (PVC) foams with quantitative isocyanurate from the toluene diisocyanate trimer (tTDI) synthesized by bulk polymerization of toluene diisocyanate (TDI) in presence of potassium stearate were prepared. The chemical structures in the different process section and the final cross-linking network of the foams were characterized by FT-IR and NMR. When the fresh tTDI was used immediately, the additional tTDI created from mixing to prefoam process wasn’t detected, despite self-polymerizing in the mixture of TDI and tTDI. It is proved that the quantitative isocyanurate structure is combined in the final crosslinking network of PVC foams. The glass transition temperature(Tg) of foams was defined by DMA. It is shown that an inflection point at about 10% appears in the tTDI content vs. Tg curve of the foams in absence of phthalic anhydride, and the Tg of foams compounded with phthalic anhydride rises linearly with the increase of trimer content.

    参考文献
    相似文献
    引证文献
引用本文

翟建峰, 薛 俭, 姜治伟, 唐 涛, 王 军, 王 治.异氰脲酸酯改性聚氯乙烯泡沫的制备与耐热性能[J].高分子材料科学与工程,2018,34(8):129-134. Jianfeng Zhai, Jian Xue, Zhiwei Jiang, Tao Tang, Jun Wang, Zhi Wang. Preparation and Heat Resistance of Polyvinyl Chloride Foams Modified with Isocyanurate[J]. Polymer Materials Science & Engineering,2018,34(8):129-134.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-09-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司