Abstract:PI/Fe3O4 nanocomposite fiber membrane with different Fe3O4 contents was prepared by eletrospinning technology. Using polyamide(PAA ) as spinning feedstocks,the PI/Fe3O4 composite was obtained after amination treatment. The micro morphology and structure of the fiber film were characterized by Fourier transform infrared spectroscopy (FT-IR),electron microscope (SEM),the thermal, mechanical, eletricity and magnetic properties of the nanocomposite fibers were characterized, the effects of Fe3O4 content and spinning process on the structure and properties of fiber membrane were systematically analyzed. The result display that the infrared spectrum of PI/Fe3O4 fiber composites is consistent with PI composite, the introduction of Fe3O4 magnetic nanoparticles does not destroy the chemical structure of PI molecules, when the PAA/Fe3O4 solid content is 20%,the addition amount of Fe3O4 is 1%,PI/Fe3O4 composite fiber film has fewer beads,well formed and even thickness,which has good thermal stability. With the increase of Fe3O4 content, reunion is getting worse, the tensile strength first increases and then decreases,elongation at break decreases by degrees. The dielectric constant and dielectric loss are less than those of PI composite,moreover,the trend is steady.The magnetization test confirms that the composite fibers show a certain magnetic property. With the increase of Fe3O4 content, the magnetic properties increase gradually.