双连续相微乳液制备多孔聚合物与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Characterization and Preparation of Porous Polymeric Materials by Bicontinuous Microemulsion Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    双连续相乳液制备多孔聚合物是以甲基丙烯酸丁酯单体(BMA),甲基丙烯酸甲酯单体(MMA)为油相,十二烷基硫酸钠(质量分数20%)水溶液为水相,丙烯酸(AA)为助乳化剂,偶氮二异丁腈(AIBN)为引发剂,在60 ℃聚合制备得到。利用扫描电镜和热重分析仪对产物的多孔结构进行表征,利用红外光谱和万能拉力机表征产物结构组成和拉伸性能等。研究了水相含量不同对聚合产物形貌的影响,扫描电镜和热重分析结果表明水相比例为40%和50%时,聚合产物为呈开孔结构的多孔聚合物。当水相比例30%时,其拉伸强度最大。

    Abstract:

    Through bicontinuous microemulsion polymerization method, porous polymeric materials were prepared by using butyl methacrylate(BMA)and methyl methacrylate(MMA)as oil phase, sodium dodecyl sulfate(SDS)-H2O as aqueous phase, acrylic acid(AA) as cosurfactants, 2, 2’-azobisobutytonitrile (AIBN) as initiator. The microporous morphology was analyzed by scanning electron microscope (SEM) and thermogravimeter (TG). FT-IR was utilized to study its structure. Materials testing machine was applied to determine the mechanical properties of products. The effects of aqueous phase concentration were studied. The SEM and TG results show that continuous porous materials are observed when the content of mixture aqueous is 40% and 50%. The content of mixture aqueous is 30%, the tensile strength is the maximum.

    参考文献
    相似文献
    引证文献
引用本文

鲍沂沂,贾少晋,李记伟,陈俊聿,曹 海,孙茜蒙.双连续相微乳液制备多孔聚合物与表征[J].高分子材料科学与工程,2018,34(9):1-4. Yiyi Bao, Shaojin Jia, Jiwei Li, Junyu Chen, Hai Cao, Ximeng Sun. Characterization and Preparation of Porous Polymeric Materials by Bicontinuous Microemulsion Polymerization[J]. Polymer Materials Science & Engineering,2018,34(9):1-4.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司