基于2,3,3′,4′-二苯醚四甲酸二酐可溶性聚酰亚胺的亚胺化方法
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Imidization Method on Soluble Polyimide Based on 2,3,3′,4′-Diphenyl Ether Tetracarboxylic Acid Dianhydride
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用2,3,3′,4′-二苯醚四甲酸二酐(α-ODPA)与柔性二胺单体1,3-二(4-氨基苯氧基)苯(1,3,4-APB)合成了可溶性聚酰亚胺,其在N,N-二甲基乙酰胺(DMAc)、N-甲基吡咯烷酮(NMP)等极性溶剂中的溶解性得到提高,研究了亚胺化方法对基于α-ODPA的可溶性聚酰亚胺性能的影响和作用机制。结果表明,亚胺化方法对相对分子质量的影响是产生各项性能变化的根本原因,基于α-ODPA的聚酰亚胺适用于化学亚胺化方法,采用化学亚胺化方法能够得到的可溶性聚酰亚胺的数均相对分子质量为2.68×104,5%热分解温度(Td5)为544.7 ℃,玻璃化转变温度(Tg)为236.1 ℃,热稳定性能良好。化学亚胺化聚酰亚胺树脂的拉伸强度为99.99 MPa,冲击强度为102.51 kJ/m2,韧性性能优异。

    Abstract:

    The soluble polyimide was synthesized with 2,3,3′,4-diphenyl ether tetracarboxylic acid dianhydride (α-ODPA) and flexible diamine 1,3-bis(4′-aminophenoxyl)benzene (1,3,4-APB), which enhanced the solubility of the polyimide in polar solvents such as N,N-dimethyl acetamide (DMAc) and N-methyl pyrrolidone(NMP).The effects and mechanism of action on the soluble polyimide based on α-ODPA were studied through imidization methods. The results show that the influence of imidization methods on molecular weight is the root cause of various performance changes. The chemical imidization method is suitable for the polyimide based on α-ODPA. The average molecular weight of the soluble polyimide obtained by the chemical imidization method is 2.678×104. 5% thermal decomposition temperature Td5 is 544.7 ℃ and glass transition temperature is 236.1 ℃, revealing the good thermal stability. The tensile strength of chemical imidized polyimide is 99.99 MPa, and the impact strength is 102.51 kJ/m2, which shows excellent toughness.

    参考文献
    相似文献
    引证文献
引用本文

孙劲松,张 朋,包建文,钟翔屿,张代军.基于2,3,3′,4′-二苯醚四甲酸二酐可溶性聚酰亚胺的亚胺化方法[J].高分子材料科学与工程,2018,34(9):5-11. Jinsong Sun, Peng Zhang, Jianwen Bao, Xiangyu Zhong, Daijun Zhang. Imidization Method on Soluble Polyimide Based on 2,3,3′,4′-Diphenyl Ether Tetracarboxylic Acid Dianhydride[J]. Polymer Materials Science & Engineering,2018,34(9):5-11.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司