涂料用超高固体份星形多元醇的合成及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目( 51203014 )


Synthesis and Properties of Ultra-High Solid Star Polyol for Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以多羟基化合物为核、叔碳酸缩水甘油酯为臂,采用一步法开环反应直接合成了3种不同臂数的星形多元醇低聚物。采用傅里叶变换红外光谱与飞行时间质谱对星形多元醇的结构进行了表征。在施工黏度300 mPa·s下,星形多元醇的固含量最高可达88%,达到了超高固体份树脂的要求。流变测试表明星形多元醇没有出现剪切变稀现象。相对于线型聚合物,星形聚合物具有较低的流动活化能,其黏度对温度变化不敏感。将星形多元醇与异氰酸酯固化剂复配制得清漆,漆膜具有良好的综合性能。

    Abstract:

    Three kinds of star polyol oligomers with different number of arms were prepared based on the ring-opening reaction of polyol and glycidyl ester of versatic acid. The structure of star polyol was characterized by Fourier transform infrared (FT-IR) and ultra high performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS). The maximum solid content of polyol solution is as high as 88% at a processing viscosity of 300 mPa·s, meeting the requirement for ultra-high solid resin. Star polyol does not exhibit shear thinning phenomenon in rheology testing. Star polyol has lower flow activation energy compared with linear polymer and its viscosity is not sensible to temperature. The coating film from varnish composed of star polyol and isocyanate curing agent has good comprehensive properties.

    参考文献
    相似文献
    引证文献
引用本文

任家兴, 任 强, 方建波, 邓 健, 陈建海, 汪称意, 李 坚.涂料用超高固体份星形多元醇的合成及性能[J].高分子材料科学与工程,2018,34(9):41-45. Jiaxing Ren, Qiang Ren, Jianbo Fang, Jian Deng, Jianhai Chen, Chenyi Wang, Jian Li. Synthesis and Properties of Ultra-High Solid Star Polyol for Coating[J]. Polymer Materials Science & Engineering,2018,34(9):41-45.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司