纳米纤维素接枝环氧基的制备与表征
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51372128)


Preparation and Characterization of Nanocellulose Grafted Epoxy Groups
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以微晶纤维素(MCC)为原料,采用酸水解法制备纳米纤维素(NCC),再以N,N-羰基二咪唑(CDI)活化纳米纤维素表面的羟基,最后将其与环氧氯丙烷进行接枝反应,得到接枝环氧基的纳米纤维素(NCC-g-ECH)。采用透射电镜、红外光谱、溶解性、接枝率、X射线衍射对所制得的样品NCC和NCC-g-ECH的结构和性能进行表征。结果表明,实验制得的NCC符合纳米尺寸;NCC-g-ECH的红外图中出现明显的环氧基峰;NCC-g-ECH的接枝率最大达到8.47%;与NCC相比,样品NCC-g-ECH在丙酮中能均匀、稳定地分散;NCC和NCC-g-ECH均为纤维素Ⅰ晶型,NCC-g-ECH的结晶度比NCC减小8.59%。

    Abstract:

    First, the microcrystalline cellulose was treated with acid hydrolysis to prepare nanocellulose(NCC).Then, NCC was activated with N,N-carbonyldiimidazole(CDI).Finally, preparation of NCC grafted epoxy groups(NCC-g-ECH) with epichlorohydrin (ECH) and activated NCC. The structure and performance of NCC and NCC-g-ECH were characterized by TEM, FT-IR, XRD and solubility testing, grafting rate, the obtained experimental results show that the scale of NCC prepared in the experiment is nanoscale. The infrared spectra of NCC-g-ECH show significant ester and epoxy peaks, and the highest grafting rate is 8.47%. NCC-g-ECH can be even and stable in acetone. The crystal of NCC and NCC-g-ECH is cellulose type Ⅰ, and compared with NCC,the crystallinity of NCC-g-ECH is decreased by 8.59%.

    参考文献
    相似文献
    引证文献
引用本文

巩桂芬, 卢 馨, 张 帆.纳米纤维素接枝环氧基的制备与表征[J].高分子材料科学与工程,2018,34(9):58-62. Guifen Gong, Xin Lu, Fan Zhang. Preparation and Characterization of Nanocellulose Grafted Epoxy Groups[J]. Polymer Materials Science & Engineering,2018,34(9):58-62.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司