缝合对泡沫夹芯复合材料低速冲击性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51763016);江西省青年科学家培养对象项目(20153BCB23024);江西省创新驱动“5511”工程科技创新人才计划(20165BCB18012)


Effect of Stitch on Low-Velocity Impact Performance of Foam Sandwich Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了研究缝合对泡沫夹芯复合材料抗低速冲击的影响,以未缝合、全厚度缝合和冲击面纤维面板三类缝合碳纤维泡沫夹芯复合材料板为研究对象,采用落锤冲击试验机对泡沫夹芯复合材料板进行10J能量的冲击试验。然后使用水浸超声波扫描成像系统对冲击后的复合材料板进行损伤检测,得出泡沫夹芯复合材料板内部不同深度层的损伤情况。采用ABAQUS有限元软件对上述三类泡沫夹芯复合材料板进行有限元模拟,得出了低速冲击响应过程及面板的损伤情况,并进行了实验与数值模拟结果对比分析。研究结果表明,缝合会使得各铺层的损伤趋向均匀化,能够大幅提高层合板的整体性使各铺层之间的衔接更加紧密。在较小冲击能量下,全厚度缝合与冲击面纤维面板缝合都能够抑制分层的破坏,并且抑制分层的效果相差不大,且靠近冲击面的层与层之间更加容易产生分层的破坏。

    Abstract:

    In order to study the effect of stitch on the low-velocity impactresistance of foam sandwich composites. In this paper, three types of unstitched, through- thickness stitched, and stitched impact surface fiber sheet carbon fiber foam sandwich composite panels were studied. The impact test of 10J energy was carried out by drop hammer impact tester.Damage detection of the foam sandwich composite panels after impact was carried out by immersed ultrasonic scanning imaging system, and the damage of the different depth carbon fiber layers in the foam sandwich composite panels was obtained. The finite element simulation of the three types of foam sandwich composite panels was carried out by ABAQUS finite element software, the response of low-velocity impact and the damage of the panel was obtained. The results show that the stitched will make the damage of the ply uniform, which can greatly improve the integrity of the laminates so that the convergence between the layers is more closely. Under the small impact energy, the full thickness stitched and stitched the impact surface fiber panel can inhibit the damage of the layer, and the effect of inhibiting the delamination is not much different, and the layers near the impact surface are more likely to induce delamination damage.

    参考文献
    相似文献
    引证文献
引用本文

龚小辉, 赖家美, 陈乐乐, 胡根泉, 黄志超.缝合对泡沫夹芯复合材料低速冲击性能的影响[J].高分子材料科学与工程,2018,34(9):63-75. Xiaohui Gong, Jiamei Lai, Lele Chen, Genquan Hu, Zhichao Huang. Effect of Stitch on Low-Velocity Impact Performance of Foam Sandwich Composites[J]. Polymer Materials Science & Engineering,2018,34(9):63-75.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司