天然橡胶/反式丁戊橡胶共混物在全钢子午线轮胎胎面胶中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Application of High-trans1,4-Poly(butadiene-co-isoprene) Rubber in the Tread Formulation of High-Performance Tire
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以天然橡胶(NR)为主体材料的全钢子午线轮胎胎面胶耐磨性普遍较差,为了提高耐磨性,并保持良好的综合性能,文中将全反式丁戊橡胶(TBIR)引入全钢子午线轮胎胎面橡胶配方,探讨TBIR部分代替NR对其性能影响。结果表明,随着TBIR含量提高,胎面胶耐磨性能显著提高,滚阻降低;通过原子力显微镜及差示扫描量热分析对胶料结晶性的研究,发现TBIR的并用量不宜过高,否则结晶度过高,对加工性能不利;TBIR并用量在20~30 phr时胶料各项性能最优。为了改善加工性能,讨论了TBIR塑炼对共混胶流变性能及各项物理性能的影响。

    Abstract:

    It was generally poor to abrasion resistance of truck bus radial tyre(TBR) tread with natural rubber(NR) as main material. To improve wear resistance and maintain good comprehensive performance, high-trans1,4-poly(butadiene-co-isoprene) rubber(TBIR) was introduced into the tread formulation of TBR tire and the influence of the content of TBIR in the NR/TBIR tread compound was investigated in this work. The results show that, when the content of TBIR increases, abrasion resistance of the tread compound improves and the rolling resistance decreases. AFM and DSC analysis results show that the content of TBIR needs to be low, or else the crystallinity is too high to be good for processability; the optimized content of TBIR is 20~30 phr. To improve process performance, the influence of plasticating of TBIR to Mooney viscosity and rheological behavior was investigated.

    参考文献
    相似文献
    引证文献
引用本文

李京超, 卢咏来, 金振涣, 陈家辉, 楼齐淼, 程侠挺, 张立群.天然橡胶/反式丁戊橡胶共混物在全钢子午线轮胎胎面胶中的应用[J].高分子材料科学与工程,2018,34(9):89-95. Jingchao Li, Yonglai Lu, Zhenhuan Jin, Jiahui Chen, Qimiao Lou, Xiating Cheng, Liqun Zhang. Application of High-trans1,4-Poly(butadiene-co-isoprene) Rubber in the Tread Formulation of High-Performance Tire[J]. Polymer Materials Science & Engineering,2018,34(9):89-95.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司