超临界流体辅助废橡胶螺杆挤出连续再生工艺优化设计
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

山东省重点研发计划项目(2017GSF17127);青岛市科技发展计划项目(17-6-3-16-gx)


Optimization Design of Continuous Regeneration Process of Waste Rubber Screw Extruded by Supercritical Fluid
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过自主研发的超临界流体辅助螺杆挤出连续再生实验平台,探究不同工艺条件对废旧胶粉再生程度的影响。实验结果表明:喂料螺杆与主螺杆最优的转速比为1∶4;再生过程中交联键断裂后搭接形成亚甲基和碳碳双键;超临界流体环境下制备再生胶的微观形貌具有更高的连续性和一致性;在螺杆转速为50 r/min的条件下,挤出产量达92 kg/h;超临界流体的加入有利于提高再生胶的品质,具有最佳再生效果的工艺条件为:螺杆转速为40 r/min,超临界流体与胶粉质量比为2%,机筒温度在水平3,这为本项目的深入实验及工业化应用奠定了基础。

    Abstract:

    In this paper, the independent research and development of supercritical fluid assisted regeneration experimental platform were used to explore the impact of different process conditions on waste rubber powder regeneration degree. Experimental results show that the optimum speed ratio of the feed screw and the main screw is 1∶4; during the regeneration process, the crosslinks are broken to form a methylene and carbon-carbon double bonds; the microstructure of recycled rubber in supercritical fluid environment has higher continuity and consistency; at the screw speed of 50 r/min, the extrusion yield is 92 kg/h; the addition of supercritical fluids is beneficial to improve the quality of reclaimed rubber.The optimum conditions for the regeneration process :the screw speed is 40 r/min, the mass ratio of supercritical fluid and rubber powder is 2%, barrel temperature at level 3. This provides the foundation for in-depth experiments and industrial applications of this project.

    参考文献
    相似文献
    引证文献
引用本文

林广义, 于晓东, 王 祥, 吕宁宁, 王权杰, 刘彦昌.超临界流体辅助废橡胶螺杆挤出连续再生工艺优化设计[J].高分子材料科学与工程,2018,34(9):101-107. Guangyi Lin, Xiaodong Yu, Xiang Wang, Ningning Lü, Quanjie Wang, Yanchang Liu. Optimization Design of Continuous Regeneration Process of Waste Rubber Screw Extruded by Supercritical Fluid[J]. Polymer Materials Science & Engineering,2018,34(9):101-107.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司