季铵阳离子型接枝淀粉的制备及对纤维的粘合性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

安徽省质量工程纺织技术实验教学示范中心建设项目(2017sxzx25)


Preparation and Adhesion Property to Fibers of Starch-Grafted Quaternary Ammonium Cation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过改变3-丙烯酰胺丙基三甲基氯化铵(ATC)对酸解淀粉(ATS)的质量比,制备一系列不同接枝率的3-丙烯酰胺丙基三甲基氯化铵接枝淀粉(S-g-PATC)。研究了S-g-PATC的接枝参数、浆液黏度特性和对纤维的粘合性能,结果表明,随着单体加入量的增加,S-g-PATC的接枝率逐渐增大,接枝效率逐渐减小;当S-g-PATC的接枝率在2.8%~10.6%范围内,随着接枝率的增加,S-g-PATC的浆液黏度逐渐增大,对涤纶纤维、棉纤维的粘合性能逐渐增大,S-g-PATC能提高对涤纶纤维、棉纤维的粘合性能。

    Abstract:

    A series of starch-grafted 3-acrylamidopropyl trimethylammonium chloride (S-g-PATC) samples with different grafting ratios were prepared by changing the mass ratio of 3-acrylamidopropyl trimethylammonium chloride (ATC) to acid-thinned starch (ATS). The grafting parameters, the viscosity characteristics of liquor and the adhesion property to fibers of S-g-PATC were studied. The results show that the grafting ratio of S-g-PATC increased gradually and the grafting efficiency decrease gradually with the increase of monomer addition. When the grafting ratio of S-g-PATC is in the range of 2.8%~10.6%, the viscosity of S-g-PATC liquor increases gradually and the adhesion property to polyester fibers and cotton fibers increase gradually with the increase of grafting ratio. S-g-PATC is capable of improving the adhesion property to polyester fibers and cotton fibers.

    参考文献
    相似文献
    引证文献
引用本文

张朝辉,徐珍珍,李 伟.季铵阳离子型接枝淀粉的制备及对纤维的粘合性能[J].高分子材料科学与工程,2018,34(9):171-175. Chaohui Zhang, Zhenzhen Xu, Wei Li. Preparation and Adhesion Property to Fibers of Starch-Grafted Quaternary Ammonium Cation[J]. Polymer Materials Science & Engineering,2018,34(9):171-175.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司