退火对聚乳酸/丙烯酸酯橡胶共混物结晶行为的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51273101);山东省自然科学基金资助项目(ZR2018MEM025)


Effect of Annealing on the Crystallization Behavior of Polylactide/Acrylic Rubber Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以丙烯酸酯橡胶(ACM)和聚乳酸(PLA)为基体制备共混体系,研究了不同配比的共混物在结晶和非晶状态下力学性能的差异,以及不同的PLA/ACM 配比、退火温度和退火时间对共混物结晶行为的影响。结果表明,在淬火和退火条件下,ACM 的加入都会使PLA/ACM 共混体系的拉伸强度下降,断裂伸长率上升,但退火条件下,共混物的结晶减弱了ACM 对共混物力学性能的影响。ACM 含量低时促进共混物中PLA的结晶。纯PLA 在退火温度为110 ℃、退火时间为15min时,形成稳定的α晶型,ACM 的加入,使PLA产生α′晶型。随着退火时间的延长和退火温度的升高,共混物的结晶度提高,且升高退火温度对结晶度的影响更明显。

    Abstract:

    The mechanical properties of the polylactide and acrylic rubber (PLA/ACM) blends with different mass ratios were investigated. The effects of different PLA/ACM ratios, annealing temperature and annealing time on crystallization behavior were investigated. The results show that the tensile strength and the elongation at break of the PLA/ACM blends under the conditions of quenching and annealing decrease with the addition of ACM. However, the effect of ACM on mechanical properties of the blend is attenuated by the crystallization of the blend under the annealing condition. The pure PLA has the highest crystallinity, and the crystallization of the blend is reduced with the addition of ACM. The stable α crystal in pure PLA is formed at the annealing temperature of 110 ℃ and annealing time of 15 min, and the α′ crystal is formed with the addition of ACM. In the blends, the crystallization of PLA is increased when less than 30 phr ACM is added. When the content of ACM is 50phr, the crystallization of PLA is decreased obviously. The crystallization of PLA /ACM blends is improved with the increasing of annealing time and the annealing temperature, and the effect of annealing temperature on the crystallization is more obvious.

    参考文献
    相似文献
    引证文献
引用本文

常宪增,李诚亮,史新妍.退火对聚乳酸/丙烯酸酯橡胶共混物结晶行为的影响[J].高分子材料科学与工程,2018,34(10):79-83. Xianzeng Chang, Chengliang Li, Xinyan Shi. Effect of Annealing on the Crystallization Behavior of Polylactide/Acrylic Rubber Blends[J]. Polymer Materials Science & Engineering,2018,34(10):79-83.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-11-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司